No teachers found matching your search. Please try another name.

Prof. Dr. Md. Shawkut Ali Khan
Professor
Abdullah Md, Galib MT, Md. Shawkut Ali Khan, Rahman T, Hossain MM. Recent advancements in flow control using plasma actuators and plasma vortex generators. Heat Transfer.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Introducing Firefighting Robot Utilizing GSM Technology, ESP International Journal of Advancements in Science & Technology, Vol.02(2024), No.1, pp. 27-38.
Research output : Contribution to journal
Md. Shawkut Ali Khan, A CFD Analysis for Evaluating Thermal Performance of Earth Air Tunnel Heat Exchanger, World Journal of Engineering Research and Technology, Vol.10 (2024), No. 1, pp. 121-140.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Analytical Examination of Nano-Fluid-Assisted Cooling Rate Enhancement in a Car Radiator, American International Journal of Sciences and Engineering Research, Vol. 6 (2023), No.1, pp. 1-14.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md Iftakharul Muhib. Simulating the Drag Reduction Model for a Vehicle by Using Vortex Generator. American International Journal of Sciences and Engineering Research, Vol. 5 (2022), No.1, pp. 31-45.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md Iftakharul Muhib, Mahdee Nafis. Thermoelectric Power Generation from Waste Heat of Gas Stove by Using the Thermoelectric Generator. American International Journal of Sciences and Engineering Research, Vol. 5 (2022), No. 1, pp. 23-30.
Research output : Contribution to journal
Md. Iftakharul Muhib, Md. Shawkut Ali Khan. An overview of health and environmental threats from the brick kiln industry around the capital of Bangladesh. American International Journal of Sciences and Engineering Research, Vol. 5 (2022), No. 1, pp. 16-22.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. A comparative study of multistoried building information modelling (BIM) method & conventional modelling method. American International Journal of Sciences and Engineering Research, Vol. 5 (2022), No. 1, pp. 8-15
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. “Analyzing the Best Quality Parameter of Die-Casting Products”, American International Journal of Sciences and Engineering Research, Vol. 5 (2022), No. 1, pp. 1-7.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. “A Comparative Study of VRF Air Conditioning System over the Conventional Domestic Air-Conditioning System, The Millennium University Journal, Vol. 6 (2022), No. 1, pp.41-58.
Research output : Contribution to journal
Md. Iftakharul Muhib, RifatAkter, Md. Humaun Kabir, Md. Shawkut Ali Khan, Md. Shamim Rayhan. “Disseminating the Biomedical Waste Generation Scenario During COVID-19: An Overview from the Lower Middle Income Country Bangladesh”, American International Journal of Nursing Education and Practice, Vol. 2 (2021), No. 1, pp. 7-14.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. “Disseminating the effect of water hardness on dyeing of cotton fabric with reactive dyes”, Journal of Biodiversity and Environmental Science, Vol. 19 (2021), No. 1, pp. 125-133.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md. Iftakharul Muhib, Md. Kawsar Sajib. “Disseminating an Automated Irrigation System Using Solar Energy in Perspective of Bangladesh”,American International Journal of Sciences and Engineering Research, Vol. 4 (2021), No. 1, pp. 14-25
Research output : Contribution to journal
Md Iftakharul Muhib, Md. Shawkut Ali Khan, Rifat Akter.“Risk Prioritization of Environmental Aspects and Occupational Health Safety in Textile Industries of Gazipur Industrial Area, Bangladesh”, Bangladesh Journal of Multidisciplinary Scientific Research, Vol. 2 (2021), No. 2, pp. 11-20.
Research output : Contribution to journal
Asrafusjaman Rubel , M. A. Kabir, Masud Rana, Ariful Islam, Md. Shawkut Ali Khan “Characterization Analysis of Textured and Diffused Monocrystalline Silicon Wafer”, European Scientific Journal, Vol.17 (2021), No.17, pp. 125-132.
Research output : Contribution to journal
Al-Amin Shuvo, Ziaul Islam, Md. Shawkut Ali Khan “Design of a Solar PV based Hybrid AC mini grid System with Load Dispatch Centre for an Off-grid Area of Bangladesh”, International Journal of Innovative Research in Electrical, Electronics, Instrumentation and control Engineering, Vol-9, Issue-7, July-2021, DOI- 10.17148/IJIREEICE.2021.9721
Research output : Contribution to journal
Monowar Wadud Hridoy, Md. Shawkut Ali Khan, Mahibuzzaman, “Experimental Study of Recycling of used engine oil utilizing various acids as washing agent”, BAUET Journal, Volume 03, Issue 01, 2021, pp. 19-27.
Research output : Contribution to journal
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. A Comparative Study of Non- Frost Refrigerator Over the Frost Refrigerator in Economical and Environmental Perspective. The Millennium University Journal, Vol. 5 (2020), No. 1, pp. 37-42
Research output : Contribution to journal
Anmona Shabnam Pranti, Arif Mohammad Shahed Iqubal, Md. Shawkut Ali Khan, Mohammad Kayesar Ahmed “Scenario of electricity trading in South Asia: Perspective and feasibility of trading between India and Bangladesh” American Journal of Electrical Power and Energy Systems, Science Publication Group, 2013; 2(6): pp. 156-165.
Research output : Contribution to journal
Md. Shawkut ALI KHAN, Koetsu YAMAZAKI, Kosuke ODA and Kazuhiko HIROOKA, “Simplified Deformation Analysis of 3D-bodyby First Order Analysis”Journal of Advanced Mechanical Design, Systems, and Manufacturing, JSME, vol. 1 (2007), No. 4, pp. 505-517.
Research output : Contribution to journal
Md. Shawkut Ali khan and Koetsu YAMAZAKI “Modeling Method of StressConcentrated Members for First Order Analysis”, Proc. of 3rd CJK-OSM, Kanazawa, Oct 30- Nov.2, 2004, pp. 835-840.
Research output : Contribution to conference
KousukeOda, Koetsu YAMAZAKI, and Md. Shawkut Ali khan, “Element Development of Simplified Deformation Analysis for 3D- First Order Analysis”, Proc. of 3rd CJK-OSM, Kanazawa, Oct 30- Nov.2, 2004, pp. 829-834.
Research output : Contribution to conference
Md. Shawkut Ali Khan, and K. Yamazaki “Modeling Method of Stress Concentrated Members for First Order Analysis- 2nd Report: Approximation of 3D- members”, Proc. JSME Annual Meeting 2003, No.03-1, Vol.VI, pp.17-18.
Research output : Contribution to conference
Md. Shawkut Ali khan and Koetsu YAMAZAKI “Modeling Method of StressConcentrated Members for First Order Analysis –3rd Report: Approximation of 3Dmembers-”, Proc. of the 14th Design Engineering & System Division Conference, JSME, No.04-38, pp. 221-222.
Research output : Contribution to conference
Koetsu YAMAZAKI, Kousuke ODA, and Md. Shawkut Ali khan, “Simplified Deformation Analysis for 3D-First Order Analysis”, Proc. of the 14th Design Engineering & System Division Conference, JSME, No.04-38, pp. 219-220.
Research output : Contribution to conference
Koetsu YAMAZAKI, Kousuke ODA, Md. Shawkut Ali khan, and Kazuhiko HIROKA, “Development of Simplified Deformation Analysis for 3D-First Order Analysis” Proc. of the 15th Design Engineering & System Division Conference, JSME, No.05-27, pp. 445-448
Research output : Contribution to conference
Koetsu YAMAZAKI, Kazuhiko HIROKA, KousukeODA, and Md. Shawkut Ali khan,“Development of Simplified Deformation Analysis for 3D-First Order Analysis – Consideration of element stiffness derivation via displacement-base strain energy expression -” Proc. of the 16th Design Engineering & System Division Conference, JSME, No.06-33, pp. 158-161.
Research output : Contribution to conference
Md. Shawkut Ali Khan, SankeorkumerDebnath, Md. Mofazzal Hossain and Mir Mohiuddin, “A comparative Study on Diesel Engine and Converted Compressed Natural Gas (CNG) Engine; Bangladesh Perspective” Proc. of the 2nd international conference on engineering education for sustainable development, ICEESD 2009, pp MTE-14
Research output : Contribution to conference
Sankeor kumer Debnath and Md. Shawkut Ali Khan, “ComparativeStudy of Elastic-Plastic properties of Bulk, Micro, and Nano Materials” Proc. of the 2nd international conference on engineering education for sustainable development, ICEESD 2009, pp MTE-13.
Research output : Contribution to conference
Mir Mohiuddin and Md. Shawkut Ali Khan “Solar Photovoltaic Water Pumping for Small Scale Irrigation in Bangladesh” Proc. of the 2nd international conference on engineering education for sustainable development, ICEESD 2009, pp MTE-11.
Research output : Contribution to conference
Md. Quamruzzaman and Md. Shawkut Ali Khan, “Nucleonic Control System and its Applications in Bangladesh (A Case Study)” Proc. of the 2nd international conference on engineering education for sustainable development, ICEESD 2009, pp EEE-03.
Research output : Contribution to conference
Mehedi Hasan, Sunjida Haque, Md. Shawkut Ali Khan, Md. Kamrul Alam Khan, “Mechanical Modeling of Dynamic Electrolyte Model: A Biomass based Nano- leveled Electricity Generation Plant”, Proc. of National Conference on Physics – 2019, Nabab Nawab Ali Chowdhury(NNAC) Senate Bhaban, University of Dhaka, Dhaka. 07-09 February, 2019, pp. 167.
Research output : Contribution to conference
Monowar Wadud Hridoy, Md. Shawkut Ali Khan, Rana Ahmad, Md. Abdur Rahman,C.H.M. Imran Kadir, “Experimental Analysis of Heat Transfer Improvementof Water Utilizing Double Counter Twisted Tape Insert”, International Conference on Mechanical, Industrial & Energy Engineering 2020, 19-21 December,2020, Khulna, BANGLADESH, ICMIEE20-206.
Research output : Contribution to conference
Prof. Dr. Md. Mizanur Rahman, CEng
Professor
Shamsuzzaman, M., Mashud, M., Rahman, M. M., Rahman, M. M., Hoq, E., & Das, D. (2023). Management and Maintenance of Textile Machinery. In Advanced Technology in Textiles: Fibre to Apparel (pp. 31-63). Singapore: Springer Nature Singapore.
Research output : Contribution to journal
Tasnim, R., Shaikat, A. S., Al Amin, A., Hussein, M. R., & Rahman, M. M. (2022). Design of a Smart Biofloc Monitoring and Controlling System using IoT. Journal of Engineering Advancements, 3(04), 155-161.
Research output : Contribution to journal
Mizanur, m., Mahbub, F., & Mashud , M. (2023, June). Performance Evaluation of a Solar Chimney at the Presence of Cold Inflow. In 8th North America Conference on Industrial Engineering and Operations Management , https://doi.org/10.46254/NA8.20230246.
Research output : Contribution to journal
Hasan, M., Mizanur, m., shahria, s., & Ullah, M. (2022, December). Building an Industrial Autonomous Line-Following Robot through the Design and Construction Processes. In 5th International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM), https://doi.org/10.46254/BD05.20220127.
Research output : Contribution to journal
Madha, J., Nawar, A., Hasan, M., & Mizanur, m. (2022, December). Design of an Bluetooth Controlled Food Delivery Waiter Robot for Restaurants. In 5th International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM), https://doi.org/10.46254/BD05.20220063.
Research output : Contribution to journal
Advanced Technology in Textiles - Fiber to Apparel (2023), Publisher: Springer Nature. https://doi.org/10.1007/978-981-99-2142-3
Research output : Contribution to book
Mizanur, R. M., Ashikur, R. M., & Ajian, M. N. (2019, August). Analysis of Evaporation Data from an Enclosed Pond Ventilated by Solar Chimney. In IOP Conference Series: Materials Science and Engineering (Vol. 606, No. 1, p. 012013). IOP Publishing.
Research output : Contribution to conference
Rahman, Md. Mizanur, Chu, C. M., Tahir, A. M., bin Ismail, M. A., bin Misran, M. S., & Ling, L. S. (2017, July). Experimentally Identify the Effective Plume Chimney over a Natural Draft Chimney Model. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012002). IOP Publishing
Research output : Contribution to conference
Ling, L. S., Rahman, Md. Mizanur, Chu, C. M., bin Misaran, M. S., & Tamiri, F. M. (2017, July), The effects of opening areas on solar chimney performance, In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012001). IOP Publishing
Research output : Contribution to conference
Ismail, M. A., Muzammil, W. K., Rahman, Md. Mizanur, Ibrahim, M. W. K., & Misran, S. (2017, July). Experimental Design and Analysis of Pump as Turbine for Micro-hydro System, In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012014). IOP Publishing
Research output : Contribution to conference
Darius, D., Misaran, M. S., Rahman, Md. Mizanur, Ismail, M. A., & Amaludin, A. (2017, July) Working parameters affecting earth-air heat exchanger (EAHE) system performance for passive cooling: A review, In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012021). IOP Publishing
Research output : Contribution to conference
Jamanun, M. J., Misaran, M. S., Rahman, Md. Mizanur, & Muzammil, W. K. (2017, July) Performance Investigation of A Mix Wind Turbine Using A Clutch Mechanism At Low Wind Speed Condition. In Materials Science and Engineering Conference Series (Vol. 217, No. 1, p. 012020)
Research output : Contribution to conference
Melvin, G. J. H., Wang, Z., Siambun, N. J., & Rahman, Md. Mizanur, (2017, July) Carbon materials derived from rice husks at low and high temperatures. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012017). IOP Publishing
Research output : Contribution to conference
Rahman Md. Mizanur, Tan, J. H., Fadzlita, M. T., & Muzammil, A. W. K. (2017, July). A Review on the Development of Gravitational Water Vortex Power Plant as Alternative Renewable Energy Resources, In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012007). IOP Publishing
Research output : Contribution to conference
Misaran, M. S., Rahman, Md. Mizanur, Muzammil, W. K., & Ismail, M. A. (2017, July) Assessment of C-Type Darrieus Wind Turbine Under Low Wind Speed Condition. In IOP Conference Series: Materials Science and Engineering (Vol. 217, No. 1, p. 012019). IOP Publishing
Research output : Contribution to conference
Chu, C. C. M., Tie, R. H. Y., & Rahman, Md Mizanur (2017, June) Simulation of Effective Plume-Chimney Above Natural Draft Air-Cooled Heat Exchangers. In ASME 2017 Power Conference Joint with ICOPE-17 collocated with the ASME 2017 11th International Conference on Energy Sustainability, the ASME 2017 15th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2017 Nuclear Forum (pp. V002T13A009-V002T13A009). American Society of Mechanical Engineers
Research output : Contribution to conference
Rahman, Md Mizanur, Phang, Hooi Kim, Chu, Chi Ming; Kumaresan, Sivakumar; Yasir, Suhaimi Md (2018) A Cold-inflow Free Solar Chimney Dryer for Seaweed Drying in Sabah, Malaysia, IEOM Conference, Bandung, Indonesia, March 6 – 8, 2018. Pp-3062 -3070
Research output : Contribution to conference
Md. Mizanur Rahman, Tan Jian Hong and Fadzlita Mohd Tamiri, (2018) “Effects of Inlet Flow Rate and Penstock’s Geometry on the Performance of Gravitational Water Vortex Power Plant” IEOM Conference, Bandung, Indonesia, March 6 – 8, 2018. Pp -2968 -2976
Research output : Contribution to conference
Misaran, M. S., Sarbatly, R., Bono, A., & Rahman, Md. Mizanur (2016, November), Effect of extrusion rate on morphology of Kaolin/PolyEtherSulfone (PESf) membrane precursor, In IOP Conference Series: Materials Science and Engineering (Vol. 160, No. 1, p. 012-013), IOP Publishing
Research output : Contribution to conference
Abu Salman Shaikat, Md. Mizanur Rahman, Suraiya Akter, Mehbub Khan (2019) Application of PLC and SCADA Based Real-Time Online Counter for Glass Bottle Manufacturing Industry in Bangladesh, Proceedings of the International Conference on Industrial Engineering and Operations Management Dhaka, Bangladesh, December 12-13, 2019
Research output : Contribution to conference
Abu Salman Shaikat, Md. Mizanur Rahman, Mehbub Khan, Mohd Habibul Kabir Nouman, Suraiya Akter (2019) Development of VFD, PLC and SCADA Based Fluid Temperature, Pressure and Level Control for Food Manufacturing Industry, Proceedings of the International Conference on Industrial Engineering and Operations Management Dhaka, Bangladesh, December 12-13, 2019
Research output : Contribution to conference
Abu Salman Shaikat, Md. Mizanur Rahman, Suraiya Akter, Mehbub Khan (2019) An Image Processing Based Glass bottle Defect Detection System, Proceedings of the International Conference on Industrial Engineering and Operations Management Dhaka, Bangladesh, December 12-13, 2019
Research output : Contribution to conference
Suraiya Akter, Md. Mizanur Rahman , Abu Salman Shaikat and Mehbub Khan (2019) Development of PLC and SCADA based Central Alarm System for Glass Bottle Manufacturing Industry, Proceedings of the International Conference on Industrial Engineering and Operations Management Dhaka, Bangladesh, December 12-13, 2019.
Research output : Contribution to conference
Chu, C. C. M., Chu, R. K. H., & Rahman, M. M. (2012). Experimental study of cold inflow and its effect on draft of a chimney. Advanced Computational Methods and Experiments in Heat Transfer XII, WIT Transactions on Engineering Sciences, 75, 73-82.
Research output : Contribution to book
Kumaresan S., Rahman M.M., Chu C.M., Phang H.K. (2013) A Chimney of Low Height to Diameter Ratio for Solar Crops Dryer. In: Pogaku R., Bono A., Chu C. (eds) Developments in Sustainable Chemical and Bioprocess Technology. Springer, Boston, MA.
Research output : Contribution to book
Rahman M.M., Lee Y.S., Tamiri F.M., Hong M.G.J. (2018) Anaerobic Digestion of Food Waste. In: Horan N., Yaser A., Wid N. (eds) Anaerobic Digestion Processes. Green Energy and Technology. Springer, Singapore. 
Research output : Contribution to book
Siddiquee, S., Melvin, G. J. H., & Rahman, M.M. (Eds.). (2019). Nanotechnology: Applications in Energy, Drug and Food. Springer.
Research output : Contribution to book
Muzammil W.K., Rahman M.M., Fazlizan A., Ismail M.A., Phang H.K., Elias M.A. (2019) Nanotechnology in Renewable Energy: Critical Reviews for Wind Energy. In: Siddiquee S., Melvin G., Rahman M. (eds) Nanotechnology: Applications in Energy, Drug and Food. Springer, Cham. https://doi.org/10.1007/978-3-319-99602-8_3
Research output : Contribution to book
Rahman M., Paul S., Mahbub F., Rezwan-Us-Saleheen (2020) Biodegradability and Composite Coatings: Past, Present and Future Prospects. In: Siddiquee S., Gan Jet Hong M., Mizanur Rahman M. (eds) Composite Materials: Applications in Engineering, Biomedicine and Food Science. Springer, Cham. 
Research output : Contribution to book
Chu Chi Ming, Sivakumar Kumaresan and Md. Mizanur Rahman (2008) “ Zone of Flow Establishment and Plume chimney effect” 15th Regional Symposium on Chemical Engineers / 22nd symposium of Malaysian Chemical Engineers, Innovations for Sustainable Future, Faculty of Engineering and Environment, University Kebangsaan Malaysia, Vol II, pp- 431 – 434. 
Research output : Contribution to conference
S.C. Bhattacharya, M. Augustus Leon and Md. Mizanur Rahman, (2000) “A Study on Improved Biomass Briquetting” International Conference on Biomass-based Fuels and Cooking Systems (BFCS 2000), Pune, India, 20-24 Nov. 2000
Research output : Contribution to conference
Moral M. Nawsher Ali, and Md. Mizanur Rahman, (2001)"Biomass for Briquetting" Proc. Training workshop on Reverse Engineering, Organized by Institute of Appropriate Technology (IAT), Bangladesh University of Engineering and Technology (BUET) and Bangladesh Institute of technology (BIT) Khulna on April 6 - 10, 2001. pp-98-118
Research output : Contribution to conference
Moral, M. N. A. and Md. Mizanur Rahman, (2001) “Utilization of Biomass for Briquetting in Bangladesh", Proc. 4th International Conference on Mechanical Engineering, Held on 26-28 December 2001 BUET, Bangladesh.
Research output : Contribution to conference
Kader, M. G. Hayder, M. M. A and Md. Mizanur Rahman, (2001) "Suitable Raw materials for Briquette in Bangladesh" Proc. National seminar on Utilization of Renewable Energy in Rural Areas of Bangladesh, Held on November 9 - 10, 2001, BIT Khulna. pp-171 –177
Research output : Contribution to conference
Md. Golam Kader, Md. Mizanur Rahman, Dr. Nawsher Ali Moral, and Dr. A. N. M. Mizanur Rahman, (2003) “Improved Biomass Briquetting Technology for Reducing Environmental Pollution”, Regional Conference on Energy Technology Towards a Clean Environment, 12-14th February 2003, Phuket Thailand.
Research output : Contribution to conference
Md. Mizanur Rahman, Kamrujjaman Khan, Dr. M. N. Ali Moral, and Dr. A. N. M. Mizanur Rahman, (2003) “Biomass Briquetting Technology and Environmental Pollution”, proc. Seminar on The role of Renewable and Alternative Energy Sources for National Development, organized by Department of Mechanical Engineering, Khulna University of Engineering and Technology (KUET) and Asian Institute of Technology, 19 – 20 December, 2003 Khulna, Bangladesh, pp-24-30
Research output : Contribution to conference
Md. Mizanur Rahman (2004) “A Study of the Health Impact of Air Pollution from the Mae Moh Thermal Power Plant in Thailand”, thematic paper was submitted to the Faculty of Graduate Studies, Mahidol University for the degree of Master of Science Environmental Management on November 29, 2004
Research output : Contribution to conference
Md. Mizanur Rahman and Chu Chi Ming (2007) “Design of Air Inlet Duct to Investigate the Buoyancy Effect of Plume on the Draft through Laboratory Scale Forced Draft Air-Cooled Heat Exchangers” Published in the journal of “21st Symposium of Malaysian Chemical Engineers” 12 – 14th December 2007 at UPM, Malaysia.
Research output : Contribution to conference
Md. Mizanur Rahman (2007) “Design of Air Inlet Duct for Laboratory Scale Forced Draft Air-Cooled Heat Exchangers To Investigate The Aerodynamics Of Plume”, published in the Proceedings of the International Conference on Mechanical Engineering 2007 (ICME2007) 29- 31 December 2007, Dhaka, Bangladesh
Research output : Contribution to conference
Md. Mizanur Rahman,  Sivakumar Kumaresan and Chu Chi Ming (2008) “ Development of Technique to Measure velocity over a perforated Horizontal Hot Flat Plate” Presented in the 3rd International Conference on Post Graduate Education on 16 -17th December 2008 at USM, Pinang, Malaysia.
Research output : Contribution to conference
Sharif Ahmed, Md. Mizanur Rahman, Md. Aminul Islam, Mohammad Mashud and Md. Nawsher Ali Moral, (2008)  “Role of Biomass Briquetting in the Renewable Energy Sector and Poverty Diminution for Bangladesh” Accepted for presentation on the 4th  BSME-ASME International Conference on Thermal Engineering 27-29 December, 2008, Dhaka, Bangladesh
Research output : Contribution to conference
N. M. Mizanur Rahman, Md. Nawsher Ali Moral and Md. Mizanur Rahman,(2000) ” State of the Art of Biomass Briquetting in Bangladesh”, International Conference and Workshop on ”Critical Issues in Energy and Development- Challenges for the OIC Countries”, 20-23 November 2000, Dhaka, Bangladesh, Page: 234-243
Research output : Contribution to conference
Md. Mizanur Rahman, Sivakumar Kumaresan and Chu Chi Ming (2009), “Investigation of the stability of Temperature inside the Solid Chimney over a Model Air –Cooled Heat Exchanger” Presented in the 2nd Seminar on Engineering and Information Technology, on 8th – 9th July 2009 at SKTM, UMS, Kota Kinabalu, Sabah, Malaysia.
Research output : Contribution to conference
Chu, C. M. and Md. Mizanur Rahman, (2009), “A Method to Achieve Robust Aerodynamics and Enhancement of Updraft in Natural Draft Dry Cooling Towers, Presented on 19th – 23rd July at ASME Summer Heat Transfer Conference at San Francisco, Calif, USA 
Research output : Contribution to conference
Md. Mizanur Rahman, Sivakumar Kumaresan and Chu Chi Ming (2009), “Temperature Profile Data in the Zone of Flow Establishment above a Model Air Cooled Heat Exchanger with 0.56m2 face Area Operating under Natural Convection”, Presented in the International Conference on Chemical and Bio-processes Engineering on 12 – 14th August 2009 at Kota Kinabalu, Sabah, Malaysia
Research output : Contribution to conference
Chu Chi Ming, Md. Mizanur Rahman and Sivakumar Kumaresan (2010) Effect of Cold Inflow on Chimney Height of Natural Draft Cooling Towers The 8th International Topical Meeting on Nuclear Thermal-Hydraulics, Operation and Safety (NUTHOS-8) Shanghai, China, October10-14, 2010
Research output : Contribution to conference
Kumaresan, S., Md. Mizanur Rahman, Chu, C.M. and Phang, H.K. (2012). A Chimney of Low Height to Diameter ratio for solar crops dryer. Proceedings of the 4th International Conference of Chemical and Bioprocess Engineering (ICCBPE 2012) in conjunction with 26th Symposium of Malaysian Chemical Engineering, Sabah, Malaysia, 21-23rd Nov 2012. 
Research output : Contribution to conference
Md. Mizanur Rahman, Ming, C. C., Kumaresen, S., Kim, P. H. (2013) “Feasibility Study of the Low Height to Diameter Ratio Solar Chimney”, published in the proceedings of the 2nd International Conference on Solar Energy Materials, Solar Cells & Solar Energy Applications (Solar Asia 2013), 22- 24th August 2013
Research output : Contribution to conference
Chi Ming Chu, Md. Mizanur Rahman, Sivakumar Kumaresan and Hooi Kim Phang (2014) Heat Balance of a Simulated Natural Convection Vertical Cylinder with Inlet Constriction and Flow Reversal at Chimney Exit, Proceedings of the International Conference on Heat Transfer and Fluid Flow Prague, Czech Republic, August 11 - 12, 2014 Paper No. 173
Research output : Contribution to conference
Md. Mizanur Rahman, Chu Chi Ming, Mohd Suffian Bin Misaran, (2015) Experimental Study to Determine the Effect of Wire Mesh Pore Size on Natural Draft Chimney Performance, presented in the 17th International Conference on Automotive and Mechanical Engineering, World Academy of Science Engineering and Technology May 28 – 29 2015, Tokyo, Japan
Research output : Contribution to conference
Sivakumar Kumaresan, Md Mizanur Rahman, and Chu, Christopher C. M. (2016) CFD simulation and experimental data for a fixed heat load natural draft air cooled heat exchanger with cold inflow mitigation. In: ASME 2015 Power Conference, POWER2015, 28 Jun - 2 Julai 2015, San Diego, California.
Research output : Contribution to conference
Md. Mizanur Rahman, Ling Leh Sung, Fadzlita Mohd. Tamiri, Mohd Suffian Bin Misaran (2016), “Evaluate Performance of Earth – Air – Pipe System under Laboratory Condition”, Proceeding of International Conference on Industrial Engineering and Operations Management, Kuala Lumpur, Malaysia March 2016
Research output : Contribution to conference
Siddiquee, Shafiquzzaman, Gan Jet Hong, Melvin, Rahman, Md. Mizanur (Editors) (2020). Composite Materials: Applications in Engineering, Biomedicine and Food Science (p 484). Springer International Publishing, Springer, Cham.
Research output : Contribution to book
Jawad, A., Misaran, M.S., Rahman, M.M. and Ismail, M.A., 2021. Experimental Investigation on The Effect of Divergent Tower Solar Chimney on The Theoretical Power Potential. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81(1), pp.140-149.
Research output : Contribution to journal
Stevenson Guramun, Mohd Suffian Misaran, Mohd Kamel Wan Ibrahim, Md Mizanur Rahman, 2019 Trends of hybrid earth?air?pipe (EAP) photovoltaic cooling system for efficiency improvement: a review, Journal of Mechanical Engineering Research and Developments (JMERD) 42 (4)191-195
Research output : Contribution to journal
Ahmed Jawad, Md. Mizanur Rahman, Mohd Suffian Bin Misaran, 2019, Study the effects of physical parameters on performance in the divergent solar chimney Journal of Mechanical Engineering Research and Developments (JMERD) 42 (4)249-253
Research output : Contribution to journal
Md. Mizanur Rahman, Mohd. Suffian Bin Misaran, Mohd. Jamrye Bin Jamanun and Ahmad Jawad (2018) “Estimate the Ventilation Effect from Wire Mesh Screen Assisted Solar Chimney” Journal of Energy and Power Engineering 12 (2018) 127-131
Research output : Contribution to journal
Md. Mizanur Rahman, Jamanun, M. J. B., Choong, A. T. K., & Hong, M. G. J. (2018). Study the Thermal Effect on Low Cost Lithium ions Battery. International Journal of Applied Engineering Research, 13(11), 9154-9158.
Research output : Contribution to journal
Misaran, M. S., Sarbatly, R., & Rahman, Md. Mizanur (2017) Study of Shear Rates in Spinning Process of Kaolin/Polyethersulfone (Pesf) Membrane Precursor: Effect on Fiber Morphology. ARPN Journal of Engineering and Applied Sciences, Vol. 12, No. 10, May 2017
Research output : Contribution to journal
Md. Mizanur Rahman, Tan Jian Hong, Raymond Tang, Ling Leh Sung, Fadzlita Binti Mohd Tamiri (2016) “Experimental Study the Effects of Water Pressure and Turbine Blade Lengths & Numbers on the Model Free Vortex Power Generation System”, International Journal of Current Trends in Engineering & Research (IJCTER), Volume 2, Issue 9 pp 13-17.
Research output : Contribution to journal
Chu, C. M., Rahman, Md. Mizanur, & Kumaresan, S. (2016). Improved thermal energy discharge rate from a temperature-controlled heating source in a natural draft chimney, Applied Thermal Engineering, 98, 991-1002
Research output : Contribution to journal
Md. Ashikur Rahman; Md. Mizanur Rahman, Noor Ajian, M. L.; Chu Chi Ming, (2015) Preliminary data of evaporation characteristics for an open pond in East Malaysia. Journal of Applied Science and Agriculture 2015 Vol. 10 No. 5 Special pp. 6-12
Research output : Contribution to journal
Phang, H. K., Chu, C. M., Kumaresan, S., Rahman, Md. Mizanur, & Yasir, S. M. (2015). Preliminary study of seaweed drying under a shade and in a natural draft solar dryer. International Journal of Science and Engineering, 8(1), 10-14. 
Research output : Contribution to journal
Rahman, Md. Mizanur., Mashud, M. U. H. A. M. M. A. D., Chu, C. M., bin Misaran, M. S., Sarker, M., & Kumaresen, S. (2015). “A passive cooling system of residential and commercial buildings in summer or hot season” In IOP Conference Series: Materials Science and Engineering (Vol. 100, No. 1, p. 012031). IOP Publishing
Research output : Contribution to conference
Md. Mizanur Rahman, C.M. Chu, S. Kumaresen, F.Y. Yan, P.H. Kim, M. Mashud, M.S. Rahman (2014) Evaluation of the Modified Chimney Performance to Replace Mechanical Ventilation System for Livestock Housing, Procedia Engineering, Volume 90, Pages 245–248
Research output : Contribution to journal
Mohd Suffian Misaran, Rossalam Sarbatly, Md Mizanur Rahman (2014) “Rheological properties of kaolin/PolyetherSulfone (PESf) used in hollow fiber fabrication: Effects of content ratio” Applied Mechanics and Materials, volume 660 pp 244-248
Research output : Contribution to journal
Md Mizanur Rahman, Gias, I., Tanvir, M., Mashud, M., & Misbaul Islam, M. (2014), Mach and Pressure Distribution at the Exit of the Nozzle: A Numerical Documentation. International Journal of Engineering & Technology, 14(3)
Research output : Contribution to journal
Chu Chi Ming, Md. Mizanur Rahman and Sivakumar Kumaresan (2012), “Effect of Cold Inflow on Chimney Height of Natural Draft Cooling Towers”, Vol. 249, August, pp. 125– 131, Nuclear Engineering and Design, Elsevier
Research output : Contribution to journal
Md Mizanur Rahman, Assad-Uz-zaman, M., & Mashud, M. (2014). Performance Evaluation of Water Jet Pump for Nozzle to Throat Area Ratios on Suction Lift. International Journal of Mechanical & Mechatronics Engineering, 14(3)
Research output : Contribution to journal
Rahman M., Hussein M.R., Shaikat A.S., Tasnim R. (2020) Composite Materials for Wind Turbine Structure. In: Siddiquee S., Gan Jet Hong M., Mizanur Rahman M. (eds) Composite Materials: Applications in Engineering, Biomedicine and Food Science. Springer, Cham. 
Research output : Contribution to book
Erin M.T.U.R., Mashud M., Tamiri F.M., Rahman M.M. (2021) Technical Barriers Analysis for Solar Chimney Power Plant Exploration. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Saleheen R.., Rahman M.M., Mashud M., Paul S. (2021) Economic Analysis of Solar Chimney: Literature Review. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Sung L.L., Suffian bin Misran M., Tarek Ur Rahman Erin M., Rahman M.M. (2021) Solar Chimney and Turbine-Assisted Ventilation System. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Jawad A., Suffian bin Misran M., Mashud M., Rahman M.M. (2021) Study the Effect of Divergent Section on Solar Chimney Performance. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Chu CM., Suffian bin Misran M., Tham H.J., Rahman M.M. (2021) Numerical Analysis of Solar Chimney Design for Power Generation. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Rahman M.M., Chu CM., Kumaresen S. (2021) Theory of Natural Draft Chimney and Cold Inflow. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Rahman M.M., Chu CM., Kumaresen S., Yeoh S.L. (2021) Introduction of Cold Inflow Free Solar Chimney. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Shyan C.K., Mashud M., Rahman M.M., Tamiri F.M. (2021) Effect of Wire Mesh Screen on the Natural Draft Chimney. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Rahman, Md. Mizanur, Chu, Chi-Ming (Eds.) (2021). Cold Inflow-Free Solar Chimney. Design and Applications, Springer.
Research output : Contribution to book
Bhattacharya, S. C., M. A. Leon, Md. Mizanur Rahman, (2002) “A study on Improved Biomass Briquetting” Reprinted from Energy for Sustainable Development, the Journal of the International Energy Initiative, Volume VI, No. 2 June 2002, Page 67 – 77
Research output : Contribution to journal
Md. Mizanur Rahman, and Sivakumar Kumaresan, and Chu, Chi Ming (2010) Temperature profile data in the zone of flow establishment above a model air-cooled heat exchanger with 0.56 m2 face area operating under natural convection. Journal of Applied Sciences, 10 (21). pp. 2673-2677. ISSN 1812-5654
Research output : Contribution to journal
Jawad A., Suffian bin Misran M., Shaikat A.S., Tarek Ur Rahman Erin M., Rahman M.M. (2021) Effects of Physical Geometry on Solar Chimney Performance. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to book
Farhan Mahbub
Associate Professor
System Identification Of Internal Model Control: Internal Model Control ASIN ? : ? 3846523526 Publisher ? : ? LAP LAMBERT Academic Publishing (October 19, 2011) ISBN-10 ? : ? 9783846523520 ISBN-13 ? : ? 978-3846523520
Research output : Contribution to book
Saleheen, R. U., Ahmed Farhan, Enamul Hoq, & Farhan Mahbub. (2023). Design and Construction of an Automated Flood Intimation System. International Journal of Integrative Research, 1(6), 377–384. https://doi.org/10.59890/ijir.v1i6.74
Research output : Contribution to journal
Mizanur, m., Mahbub, F., & Mashud , M. (2023, June). Performance Evaluation of a Solar Chimney at the Presence of Cold Inflow. In 8th North America Conference on Industrial Engineering and Operations Management , https://doi.org/10.46254/NA8.20230246.
Research output : Contribution to journal
Design and Analysis of Planetary Four-Wheeler Mars Rover: Four-Wheeler Mars Rover Publisher ? : ? Scholars' Press (September 4, 2020) ISBN-10 ? : ? 6138940393 ISBN-13 ? : ? 978-6138940395
Research output : Contribution to book
An Image Processing and Artificial Intelligence based Traffic Signal Control System of Dhaka Date of Conference: 18-19 April 2019 Date Added to IEEE Xplore: 18 January 2021 ISBN Information: DOI: 10.1109/APCoRISE46197.2019.9318966 Publisher: IEEE Conference Location: Depok, Indonesia
Research output : Contribution to conference
Design and Construction of an Autonomous Aerial Vehicle ('ZAC-528') Publisher ? : ? Scholars' Press (August 20, 2021) ISBN-10 ? : ? 6138957946 ISBN-13 ? : ? 978-6138957942
Research output : Contribution to book
Study on Development of an Automatic Wind Turbine System 2nd International Conference on Mechanical Engineering and Applied Sciences (ICMEAS),MIST, 2022
Research output : Contribution to journal
Design and Construction of an Automated Flood Intimation System. International Journal of Integrative Research, 1(6), 377–384. 
Research output : Contribution to journal
Introduction to Solar Chimney and Its Applications. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore.
Research output : Contribution to conference
Rahman M., Paul S., Mahbub F., Rezwan-Us-Saleheen (2020) Biodegradability and Composite Coatings: Past, Present and Future Prospects. In: Siddiquee S., Gan Jet Hong M., Mizanur Rahman M. (eds) Composite Materials: Applications in Engineering, Biomedicine and Food Science. Springer, Cham.
Research output : Contribution to book
Farhan, A. ., Saleheen, R. us, Wei, C. L. ., & Mahbub, F. . (2021). De-noising of an Image using Fuzzy Inference System and Performance Comparison with the Conventional system. Journal of Engineering Advancements, 2(03), 164–168.
Research output : Contribution to journal
A. S. Shaikat, R. -u. Saleheen, F. Mahbub, R. Tasnim and M. M. Rahman, (2021) "Determination of Angle & Velocity of a Welding Robot Functioning in a Cylindrical Workspace," International Conference on Computer, Communication, Chemical, Materials and Electronic Engineering (IC4ME2), pp. 1-6,
Research output : Contribution to conference
9th North American International Conference onIndustrial Engineering and Operations ManagementWashington, DC, USA, June 4-6, 2024, Venue: University of the District of ColumbiaApplying Deep Learning for Controlling Robotic Arm Gestures.” Presented at the 9 th North American IEOMWashington, DC Conference.
Research output : Contribution to conference
Examine How a Turbine Ventilator Affects Chimney Performance 
Research output : Contribution to conference
IOT and GSM Integrated Automated Water Pump Controlling System for Prevention of Water Wastage
Research output : Contribution to conference
Graphene for Qubits: A Brief Review
Ahmed, M.A., Saagoto, M.S., Mahbub, F., Barua, P. (2025). Graphene for Qubits: A Brief Review. In: Yang, XS., Sherratt, S., Dey, N., Joshi, A. (eds) Proceedings of Tenth International Congress on Information and Communication Technology. ICICT 2025. Lecture Notes in Networks and Systems, vol 1413. Springer, Singapore. https://doi.org/10.1007/978-981-96-6435-1_15
Research output : Contribution to conference › Chapter › peer-review
Nahiyan Al-Azad
Assistant Professor
Assessment of Flexural Strength and Fractography Analysis of Honeycomb Sandwiched Material Reinforced with Natural Fibres for Construction Industry Applications
Research output : Contribution to journal › Article › peer-review
Failure Analysis Of Natural Fibre Honeycomb Composite Sandwich Panel
Research output : Contribution to chapter › Chapter › peer-review
Flexural Performance of Natural Fiber Honeycomb (NFH) Sandwiched Structure Composite for Construction Industry Application
Research output : Contribution to chapter › Chapter › peer-review
Advancements in Natural Fibre Composites for industrial Applications
EISBN: 978-967-2426-46-2
Research output : Contribution to book › Editorial › not peer-review
Microgrid Development and Optimization
ISBN: 978-967-2426-55-4
Research output : Contribution to book › Editorial › not peer-review
Influencing factors in extension of time claims
Research output : Contribution to conference › Article › peer-review
Investigation of specific energy absorption of natural fiber honeycomb sandwich structure composite as building construction material application
Research output : Contribution to conference › Paper › peer-review
Modelling of Green Energy System in Pulau Perhentian
Research output : Contribution to conference › Paper › peer-review
A Review on Development of Natural Fibre Composites for Construction Applications
Research output : Contribution to journal › Article › peer-review
A Mini Review on Testing Methods for Mechanical Properties of Natural Fibre Honeycomb Sandwich Structure and Fractography Analysis
Research output : Contribution to journal › Article › peer-review
A Mini Review on Natural Fiber Honeycomb (NFH) Sandwiched Structure Composite: Flexural Perfomance Perspective
Research output : Contribution to journal › Article › peer-review
Defect Recognition Method for Magnetic Leakage Detection in Oil and Gas Steel Pipes Based on Improved Neural Networks
Research output : Contribution to journal › Article › peer-review
Defect Recognition Method for Magnetic Leakage Detection in Steel Pipes Based on Improved Neural Networks
Research output : Contribution to journal › Article › peer-review
Servant, Democratic, and Transformational Leadership Styles: Implications on Higher Educational Institutions (HEIs) in Malaysia
Research output : Contribution to journal › Article › peer-review
A Mini Review of Renewable Energy Strategies for Pulau Perhentian Net Zero Journey
Research output : Contribution to journal › Article › peer-review
Finite Element Analysis of Magnetic Flux Leakage Detection: Characterizing Defect Size And Depth Effects
Research output : Contribution to journal › Article › peer-review
Relationship between Teachers’ Perceived Cruciality of Digital Leadership among Principals and Their Wellbeing in Sabah, Malaysia
Research output : Contribution to journal › Article › peer-review
Instructional Leadership Among Principals in Sabah, Malaysia: A Quantitative Study on Teachers’ Perceptions
Research output : Contribution to journal › Article › peer-review
Visionary leadership among department heads: A quantitative study on academics’ perceptions in Sabah, Malaysi
Research output : Contribution to journal › Article › peer-review
Techno-economic assessment and optimization of hybrid renewable energy systems for island electrification: Case studies of Perhentian and Tioman Islands, Malaysia
Research output : Contribution to journal › Article › peer-review
Modelling and assessment of renewable energy systems for decarbonization in Perhentian and Tioman Islands
Research output : Contribution to journal › Article › peer-review
Democratic Leadership Among Department Heads in Sabah, Malaysia: A Quantitative Study on Lecturers’ Perceptions.
Research output : Contribution to journal › Article › peer-review
Effect Of Water Absorption On Natural Fiber Honeycomb Composite Sandwiched Panel for Construction Material Application
Research output : Contribution to chapter › Chapter › peer-review
Rumana Tasnim
Assistant Professor
Design of a smart biofloc monitoring and controlling system using IoT
Research output : Contribution to journal › Article › peer-review
Computer Vision Based Automated Attendance System Using Face Recognition
Research output : Contribution to journal › Article › peer-review
Machine Learning-Based Fault-Tolerant Inertial Navigation System for Micro Tunnel Boring Machines
Research output : Contribution to conference › Paper › peer-review
Machine Learning and IoT in Healthcare: Recent Advancements, Challenges & Future Direction
Zonayed, M., Tasnim, R., Jhara, S.S., Mimona, M.A., Hussein, M.R., Mobarak, M.H. and Salma, U., 2025. Machine Learning and IoT in Healthcare: Recent Advancements, Challenges & Future Direction. Advances in Biomarker Sciences and Technology.
Research output : Contribution to journal › Review › peer-review
An IoT enabled Artifact Protection System for Museum using Computer Vision
Research output : Contribution to journal › Article › peer-review
An Automated Floor Cleaner Robot for Domestic and Industrial Applications
Research output : Contribution to conference › Paper › peer-review
A Comparative Analysis of Brain Atlases and DNN-Based Autism Spectrum Disorder Detection Using IMPAC Dataset
Research output : Contribution to conference › Paper › peer-review
IoT Enabled Water Flow Management and Monitoring System for Hydroelectric Power Generation
Research output : Contribution to conference › Paper › peer-review
Sensors and Actuators
Research output : Contribution to chapter › Chapter › peer-review
Ethical & Social Consideration
Research output : Contribution to chapter › Chapter › peer-review
Emerging Applications of Mechatronics
Research output : Contribution to chapter › Chapter › peer-review
Introduction to Mechatronics
Research output : Contribution to chapter › Chapter › peer-review
IOT Architecture and its Integration with Mechatronics
Research output : Contribution to chapter › Chapter › peer-review
Mechatronics: Fundamentals and Applications
Research output : Contribution to book › Editorial › peer-review
Advances of materials science in MEMS applications: A review
Research output : Contribution to journal › Article › peer-review
A Comprehensive Review on the Advances of Nanowires in Multidisciplinary Applications
Research output : Contribution to journal › Article › peer-review
IOT and GSM Integrated Automated Water Pump Controlling System for Prevention of Water Wastage
Research output : Contribution to journal › Article › peer-review
IOT and GSM Integrated Automated Water Pump Controlling System for Prevention of Water Wastage
Research output : Contribution to journal › Article › peer-review
Study the Effect of Wire Mesh Screen on Solar Chimney Assisted Natural Ventilation System
Research output : Contribution to conference › Chapter › peer-review
Atika Arshad, Ahmad Fadzil Ismail, Sheroz Khan, AHM Zahirul Alam, Rumana Tasnim, Syed Samnan Haider, Mohammed M Shobaki, Zeeshan Shahid (2013). Transforming human gait for signature signals characterization. In IOP Conference Series: Materials Science and Engineering, 2-4 July, 2013. Kualalampur, Malaysia (Vol. 53, No. 1, p. 012031). IOP Publishing
Research output : Contribution to conference
Design of a Smart Biofloc Monitoring and Controlling System using IoT
Research output : Contribution to journal › Article › peer-review
Health and wellness monitoring of elderly people using intelligent sensing technique.
Research output : Contribution to conference › Article › peer-review
Rumana Tasnim, Abu Salman Shaikat, Kamruzzaman Sarkar, Md. Ismail Mahmud, Mohammad Ali, Development of an Automated Railway Level Crossing Gate Control System using PLC. Proceedings of the International Conference on Industrial Engineering and Operations Management. March 5-7, 2019, Bangkok, Thailand
Research output : Contribution to conference
Simple capacitive floor occupancy sensor for determining the pattern of a walking person
Research output : Contribution to conference › Paper › peer-review
A capacitive proximity sensing scheme for human motion detection. 
Research output : Contribution to conference › Article › peer-review
Capacitive proximity floor sensing system for elderly tracking and fall detection
Research output : Contribution to conference › Paper › peer-review
Atika Arshad, Kushsairy Abdul Kadir, Sheroz Khan, AHM Zahirul Alam, and Rumana Tasnim (2015). A     low cost capacitive sensing system for identifying and detecting falls of senior citizens. IEEE 3rd International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA) (pp. 1-5). IEEE
Research output : Contribution to conference
Rumana Tasnim, Sheroz Khan & Atika Arshad (2016). Assessing the solid mass flow sensing behaviour through capacitive sensing technique. IEEE Student Conference on Research and Development (SCOReD), 13 - 14 December, Putrajaya, Malaysia. (pp. 1-4). IEEE.
Research output : Contribution to conference
An activity monitoring system for senior citizens living independently using capacitive sensing technique.
Research output : Contribution to conference › Article › peer-review
A Real Time Electrical Load Distribution Monitoring and Controlling System Based on PLC and Web Server. 
Research output : Contribution to conference › Article › peer-review
An inductive transducer based pressure sensor for biomedical applications
Research output : Contribution to conference › Article › peer-review
 Passive monitoring techniques for elderly: A review on recent development and prospective
Research output : Contribution to journal › Article › peer-review
 A pressure sensor based inductive transducer designed for biomedical applications. 
Research output : Contribution to conference › Paper › peer-review
Capacitance-to-voltage converter design to measure small change in capacitance produced by human body movement.
Research output : Contribution to conference › Article › peer-review
Automated person tracking using proximity capacitive sensors
Research output : Contribution to conference › Article › peer-review
Analysis of phase detection circuit for human activity
Research output : Contribution to conference › Paper › peer-review
A study of pneumatic conveying of gas-solid flow for industrial application
Research output : Contribution to conference › Article › peer-review
Experimental evaluation of agricultural biomass flow sensing behaviour using capacitive technique
Research output : Contribution to conference › Article › peer-review
An Image Processing and Artificial Intelligence Based Traffic Signal Control System of Dhaka. 
Research output : Contribution to conference › Article › peer-review
Rumana Tasnim, Sheroz Khan, Atika Arshad, Molla Rashied Hussein (2018). Non-Contact Capacitive Technique for Biomass Flow Sensing. Indonesian Journal of Electrical Engineering and Computer Science, 11(2), 531-541. Scopus
Research output : Contribution to journal
Capacitive Sensing Algorithm for Elderly Activity Detection Scheme Indoor Environment. 
Research output : Contribution to journal › Article › peer-review
Rumana Tasnim, Sheroz Khan, Musse Mohamud, & Atika Arshad. (2016). A qualitative analysis of biomass flow sensing behavior using capacitive technique. IIUM Engineering Journal, 17(1), 29-40. Scopus
Research output : Contribution to journal
Low value capacitance measurement system for the application of monitoring human body
Research output : Contribution to journal › Article › peer-review
Non-Intrusive Monitoring of Everyday Behavioral Activities in an Indoor Environment. 
Research output : Contribution to journal › Article › peer-review
 Obtaining hysteresis loops at low frequency for characterization of materials to be used in biomedical applications. 
Research output : Contribution to journal › Article › peer-review
An Investigation of Soft Magnetic and Non-magnetic Materials Under Low Frequency.
Research output : Contribution to journal › Article › peer-review
Development of Pipeline Inspecting Robot (PIR) for Visual Inspection and Fault Detection.
Research output : Contribution to conference › Article › peer-review
Development of PLC and SCADA based Spray Coating System for Application in Glass Bottle Manufacturing System for Application in Glass Bottle Manufacturing Industry of Bangladesh.
Research output : Contribution to conference › Article › peer-review
Sensors in electronic applications
Research output : Contribution to chapter › Chapter › peer-review
Capacitive sensing for non- contact means of measurement. 
Research output : Contribution to chapter › Chapter › peer-review
RLC circuit response. In: Principle of Transducer Devices and Components
Research output : Contribution to chapter › Chapter › peer-review
RL Circuit response. In: Principle of Transducer Devices and Components
Research output : Contribution to chapter › Chapter › peer-review
RC circuit response. In: Principle of Transducer Devices and Components
Research output : Contribution to chapter › Chapter › peer-review
Rumana Tasnim, Rezwan us Saleheen, Tarek Ur Rahman, Farhan Mahbub (2020). Solar Chimney and its applications, In Cold Inflow-Free Solar Chimney: Design and Applications. Springer Nature
Research output : Contribution to chapter › Chapter › peer-review
Composite Materials for Wind Turbine Structure”, In Composite Materials: Applications in Engineering, Biomedicine and Food Science
Research output : Contribution to chapter › Chapter › peer-review
Atika Arshad, Sheroz Khan, Rumana Tasnim (2011). Magnetization behavior of soft magnetic materials for sensor applications. In IEEE Regional Symposium on Micro and Nanoelectronics (RSM), 28-30 September, 2011 Kota Kinabalu, Sabah, Malaysia (pp. 80-83). IEEE
Research output : Contribution to conference
Modeling of inductive coupling transducer for activation of low wattage electronic implants
Research output : Contribution to conference › Article › peer-review
An experimental magneto- inductive sensing technique   for   categorization   of   magnetic   and   non-magnetic   materials. 
Research output : Contribution to conference › Article › peer-review
Investigation of inductive coupling approach for non-contact bidirectional transfer of power and signal
Research output : Contribution to conference › Article › peer-review
A qualitative overview   of capacitive sensing techniques   for   two   phase   flow   measurement. 
Research output : Contribution to conference › Article › peer-review
Rumana Tasnim, Sheroz Khan, Musse Mohamed, Atika Arshad, Nazmus Saquib. (2012). Analyzing hysteresis loops via coupling factors for inductive sensing technique. In International Conference on Computer and Communication Engineering (ICCCE), 3-5 July, 2012. Kualalampur, Malaysia. 2012 (pp. 574-577). IEEE.
Research output : Contribution to conference
Contact type and noncontact type gas flow measuring sensors. 
Research output : Contribution to book › Article › peer-review
Output control devices: actuators.
Research output : Contribution to chapter › Chapter › peer-review
Inductive power system for energy harvesting. In: Principle of Transducer Devices and Components.
Research output : Contribution to chapter › Chapter › peer-review
On the electrode arrangements of capacitive sensor for two phase gas flow measurement: case studies. 
Research output : Contribution to chapter › Chapter › peer-review
Basic concept of inductance for inductive transducers. 
Research output : Contribution to chapter › Chapter › peer-review
Magnetic properties for magnetic transducer. In: Principle of Transducer Devices and Components
Research output : Contribution to chapter › Chapter › peer-review
Magnetic, hysteresis theory: application perspective
Research output : Contribution to chapter › Chapter › peer-review
The principle of resistive sensing. In: Principle of Transducer Devices and Components.
Research output : Contribution to chapter › Chapter › peer-review
IOT and GSM Integrated Automated Water Pump Controlling System for Prevention of Water Wastage
Research output : Contribution to conference
Nayem Hossain, Md Zobair Al Mahmud, Amran Hossain, Md Khaledur Rahman, Md Saiful Islam, Rumana Tasnim, Md Hosne Mobarak. April 2024. Advances of Materials Science in MEMS Applications: A Review. Results in Engineering, p.102115.
Research output : Contribution to journal
Computer Vision Based Automated Attendance System Using Face Recognition
Research output : Contribution to conference › Article › peer-review
Rumana Tasnim, Molla Rashied Hussein, Ahmed Farhan, Rezwan us-Saleheen, IOT and GSM Integrated Automated Water Pump Controlling System for Prevention of Water Wastage. Accepted in 6th Industrial Engineering and Operations Management Bangladesh Conference. December 26-28, 2023
Research output : Contribution to conference
A Computer Vision based Artifact Protection System for Museum
Research output : Contribution to conference › Article › peer-review
Rezwan – Us – Saleheen
Assistant Professor
Mechatronics: Fundamentals and Applications
Research output : Contribution to book › Editorial › peer-review
Analysis of Production Loss to Enhance the Productivity of a Knitting Floor
Das, D., Asfi, S., Saleheen, R. us, Hoque, M. B., Rahman, M. M., & Baria, B. (2025). Analysis of Production Loss to Enhance the Productivity of a Knitting Floor. Journal of Engineering Advancements, 6(01), 11-15. https://doi.org/10.38032/jea.2025.01.002
Research output : Contribution to journal › Article › peer-review
Saleheen, R. U., Ahmed Farhan, Enamul Hoq, & Farhan Mahbub. (2023). Design and Construction of an Automated Flood Intimation System. International Journal of Integrative Research, 1(6), 377–384. 
Research output : Contribution to journal › Article › peer-review
Farhan, A. ., Saleheen, R. us, Wei, C. L. ., & Mahbub, F. . (2021). De-noising of an Image using Fuzzy Inference System and Performance Comparison with the Conventional system. Journal of Engineering Advancements, 2(03), 164–168.
Research output : Contribution to journal › Article › peer-review
Saleheen, R. us, S. Shaikat , Islam, S. & Rahman, M. R. (2021). Motion Based Automatic Streetlight System with Vehicle Speed Surveillance. International Journal of Engineering Applied Sciences and Technology, 6(03), 1–5. 
Research output : Contribution to journal › Article › peer-review
MTUR Erin, MM Rahman, R us Saleheen (2021). Performance Evaluation of a Biomass Cook Stove with Variation of Chimney Height and Air Intake System. Energy and Thermofluids Engineering, Volume-1, Issue-1-2, PP 39-45.
Research output : Contribution to journal › Article › peer-review
A. S. Shaikat, R. -u. Saleheen, F. Mahbub, R. Tasnim and M. M. Rahman, (2021) "Determination of Angle & Velocity of a Welding Robot Functioning in a Cylindrical Workspace,"  International Conference on Computer, Communication, Chemical, Materials and Electronic Engineering (IC4ME2), pp. 1-6,
Research output : Contribution to conference › Article › peer-review
Saleheen R.., Rahman M.M., Mashud M., Paul S. (2021) Economic Analysis of Solar Chimney: Literature Review. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to chapter › Article › peer-review
Tasnim R., Saleheen R.., Erin M.T.U.R., Mahbub F. (2021) Introduction to Solar Chimney and Its Applications. In: Rahman M.M., Chu CM. (eds) Cold Inflow-Free Solar Chimney. Springer, Singapore. 
Research output : Contribution to chapter › Article › peer-review
Rahman M., Paul S., Mahbub F., Rezwan-Us-Saleheen (2020) Biodegradability and Composite Coatings: Past, Present and Future Prospects. In: Siddiquee S., Gan Jet Hong M., Mizanur Rahman M. (eds) Composite Materials: Applications in Engineering, Biomedicine and Food Science. Springer, Cham. 
Research output : Contribution to chapter › Article › peer-review
S. Shaikat, R. -U. Saleheen, R. Tasnim, R. Mahmud, F. Mahbub and T. Islam, (2019),  "An Image Processing and Artificial Intelligence based Traffic Signal Control System of Dhaka" 2019 Asia Pacific Conference on Research in Industrial and Systems Engineering (APCoRISE), pp. 1-6, 
Research output : Contribution to conference › Article › peer-review
S. Shaikat, R. Tasnim, R. Saleheen3, M. Rayhan, M. T. Khan and R. Hasan (2019); "A Real Time Electrical Load Distribution Monitoring and Controlling System Based on PLC and Webserver"; 2019 International Conference on Energy and Power Engineering (ICEPE), Dhaka, Bangladesh, pp. 1-6.
Research output : Contribution to conference › Article › peer-review
Rezwan-us-Saleheen*, Muhammad Abdul Kadir and K Siddique E Rabbani (2017); “Development of an Electrical Impedance System for measuring Respiration and Heart Rate”; International Journal of Innovative Technologies; Vol. 5(01): 2321-8665.
Research output : Contribution to journal › Article › peer-review
Saleheen, R.U.S., Farhan, A., Ramesha, N.Z., Tasnim, R., Erin, M.T.U.R., Shahria, S. (2024). Emerging Applications of Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore.
Research output : Contribution to chapter › Article › peer-review
Akbar, N.I., Barua, P., Shithil, S.M., Saleheen, R.U., Mahbub, F., Hoq, E. (2024). Case Studies: Application of Mechatronics Engineering. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore.
Research output : Contribution to chapter › Article › peer-review
Erin, M.T.U.R., Farhan, A., Barua, P., Akbar, N.I., Saleheen, R.U., Saagoto, M.S. (2024). Robotics in Mechatronics Engineering. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore.
Research output : Contribution to chapter › Article › peer-review
Mahbub, F., Hoq, E., Saleheen, R.U., Farhan, A., Erin, M.T.U.R., Rahman, M. (2024). Control System in Mechatronics Engineering. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore.
Research output : Contribution to chapter › Article › peer-review
Farhan, A., Barua, P., Saleheen, R.U., Tasnim, R., Rahman, M.M., Rahman, M. (2024). Introduction to Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. 
Research output : Contribution to chapter › Article › peer-review
Rahman, M., Tasnim, R., Salehen, R., Akbar, N., Mashud, M., & Bishal, S. (2023, December). Study the Effect of Wire Mesh Screen on Solar Chimney Assisted Natural Ventilation System. In 6th Industrial Engineering and Operations Management Bangladesh Conference, 
Research output : Contribution to conference › Article › peer-review
Masud Rana
Assistant Professor
8. Mustafizur Rahman, Md. Mizanur Rahman, Masud Rana, Zahid Ahsan and M.R. Sohel, "Implementing on IoT dashboard to control boiling and cooling systems in manufacturing industries", 7th IEOM Bangladesh Conference, 2024.
Research output : Contribution to conference › Article › peer-review
9. Zahid Ahsan, Mustafizur Rahman, Masud Rana, M.R. Sohel and Md. Mizanur Rahman, "Optimizing Manufacturing Processes and Production through the Strategic Use of Additional Cutting Tools in Injection Molding Machine", 7th IEOM Bangladesh Conference, 2024.
Research output : Contribution to conference › Article › peer-review
Masud Rana, Mashrur Muntasir Nuhash, Arafat A. Bhuiyan, A CFD modelling for optimizing geometry parameters for improved performance using clean energy geothermal ground-to-air tunnel heat exchangers, Case Studies in Thermal Engineering, https://doi.org/10.1016/j.csite.2023.103867
Research output : Contribution to journal
Asrafusjaman,M.K. Kabir ,Masud Rana,Ariful Islam,Md. Shawkut Ali khan “Characterization of textured and diffused Monocrystalline Silicon wafer” European Scientific Journal, https://doi.org/10.19044/esj.2021.v17n17p125 
Research output : Contribution to journal
Masud Rana, Md. Emran Hossain, Md. Kabbir Hossain, and Arafat A. Bhuiyan “3D numerical analysis of the effect of various geometric parameters of EATHEs under steady condition” AIP Conference Proceedings 2121, 040009 (2019); https://doi.org/10.1063/1.5115880
Research output : Contribution to conference
Rahman, M., Mashud, M., Rana, M., Rana, M., Farhan, A., & Rahman, M. (2023, December). Investigate How Inlet Geometry Affects Vortex Power. In 6th Industrial Engineering and Operations Management Bangladesh Conference, https://doi.org/10.46254/BA06.20230127.
Research output : Contribution to conference
Mobarak, M.H., Hasan, M.J., Rahman, M., Rana, M., Saikat, A.S., Tasnim, R. (2024). Ethical and Social Consideration in Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_8
Research output : Contribution to book
Md. Aminul Islam, Zahid Ahsan, Mustafizur Rahman, Md. Abdullah, Masud Rana, Nayem Hossain, Mohammad Assaduzzaman Chowdhury, Machine learning in advancing anode materials for Lithium-Ion batteries – A review, Inorganic Chemistry Communications, 2024,113577,ISSN 1387-7003, https://doi.org/10.1016/j.inoche.2024.113577
Research output : Contribution to journal
Islam, M. A., Hossain, N., Ahsan, Z., Rana, M., Rahman, M., & Abdullah, M. (2025). DFT Insights into the Mechanical Properties of NMs. Results in Surfaces and Interfaces, 100417. https://doi.org/10.1016/j.rsurfi.2025.100417
Research output : Contribution to journal
Mustafizur Rahman
Assistant Professor
Catalyst Design for Hydrogen Fuel Cells: Advances and Future Directions
Rahman, M., Pappu, S. S., Hasan, M. M., Rimon, M. I. H., Oliullah, M. S., & Mobarak, M. H. (2025). Catalyst Design for hydrogen fuel cells: advances and future directions. Nano LIFE. https://doi.org/10.1142/s1793984425300109
Research output : Contribution to journal › Article › peer-review
Optimizing Manufacturing Processes and Production through the Strategic Use of additional Cutting Tools in Injection Molding Machine
Ahsan, Z., Rahman, M., Rana, M., Rana, M., and Rahman, M., 2024, December. Optimizing Manufacturing Processes and Production through the Strategic Use of additional Cutting Tools in Injection Molding Machine. In 7th IEOM Bangladesh International Conference on Industrial Engineering and Operations Management, https://doi.org/10.46254/BA07.20240028.
Research output : Contribution to conference › Article › peer-review
Implementing an IoT Dashboard to Control Boiling and Cooling Systems in Manufacturing Industries
Rahman, M., Rahman, M., Rana, M., Ahsan, Z., and Rana, M., 2024, December. Implementation of an IoT Dashboard to Control Boiling and Cooling Systems in Manufacturing Industries. In 7th IEOM Bangladesh International Conference on Industrial Engineering and Operations Management, https://doi.org/10.46254/BA07.20240017.
Research output : Contribution to conference › Article › peer-review
Questionnaires with Answers on the Advanced Technology of Automotive Engine: Bangladesh Perspective.
Islam, S., Abedin, M.Z., Miah, M.A.H., Ahsan, Z., Iqubal, A.M.S., Rahman, M., Ahmed, M.M.S., Islam, M.A., Gani, M.O. and Hye, M.A., 2023. Questionnaires with Answers on the Advanced Technology of Automotive Engine: Bangladesh Perspective. American Journal of Mechanical and Industrial Engineering, 8(2), pp.18-44.
Research output : Contribution to journal › Article › peer-review
Questionnaires with Answers on the Automotive Engine Fundamentals: Bangladesh Perspective.
Islam, S., Abedin, M.Z., Ahsan, Z., Miah, M.A.H., Iqubal, A.M.S., Ahmed, M.M.S., Rahman, M., Hye, M.A., Sikder, M.R.K., Gani, M.O. and Islam, M.A., 2023. Questionnaires with Answers on the Automotive Engine Fundamentals: Bangladesh Perspective. American Journal of Mechanical and Industrial Engineering, 8(3), pp.55-82.
Research output : Contribution to journal › Article › peer-review
Investigate How Inlet Geometry Affects Vortex Power. In 6th Industrial Engineering and Operations Management Bangladesh Conference.
Rahman, M., Mashud, M., Rana, M., Rana, M., Farhan, A., & Rahman, M. (2023, December). Investigate How Inlet Geometry Affects Vortex Power. In 6th Industrial Engineering and Operations Management Bangladesh Conference, https://doi.org/10.46254/BA06.20230127.
Research output : Contribution to conference › Article › peer-review
Progress and prospects of electrospun nanofibrous membranes for water filtration: A comprehensive review.
Mobarak, M. H., Siddiky, A. Y., Islam, M. A., Hossain, A., Rimon, M. I. H., Oliullah, M. S., Khan, J., Rahman, M., Hossain, N., & Chowdhury, M. A. (2024). Progress and prospects of electrospun nanofibrous membranes for water filtration: A comprehensive review. Desalination, 574, 117285. https://doi.org/10.1016/j.desal.2023.117285
Research output : Contribution to journal › Article › peer-review
Advances and significances of carbon nanotube applications: A comprehensive review.
Aminul Islam, M., Hasan, M., Rahman, M., Hosne Mobarak, M., Akter Mimona, M., & Hossain, N. (2024). Advances and significances of carbon nanotube applications: A comprehensive review. European Polymer Journal, 220, 113443. https://doi.org/10.1016/j.eurpolymj.2024.113443
Research output : Contribution to journal › Article › peer-review
Introduction to Mechatronics. In: Emerging Trends in Mechatronics.
Farhan, A., Barua, P., Saleheen, R.U., Tasnim, R., Rahman, M.M., Rahman, M. (2024). Introduction to Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_1
Research output : Contribution to chapter › Chapter › peer-review
Control System in Mechatronics Engineering. In: Emerging Trends in Mechatronics.
Mahbub, F., Hoq, E., Saleheen, R.U., Farhan, A., Erin, M.T.U.R., Rahman, M. (2024). Control System in Mechatronics Engineering. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_3
Research output : Contribution to chapter › Chapter › peer-review
Ethical and Social Consideration in Mechatronics. In: Emerging Trends in Mechatronics.
Mobarak, M.H., Hasan, M.J., Rahman, M., Rana, M., Saikat, A.S., Tasnim, R. (2024). Ethical and Social Consideration in Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_8
Research output : Contribution to chapter › Chapter › peer-review
Conclusion and Future Trends of Mechatronics. In: Emerging Trends in Mechatronics.
Rahman, M., Rahman, M.M., Sohel, M.R., Farhan, A., Huq, E., Mahbub, F. (2024). Conclusion and Future Trends of Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_10
Research output : Contribution to chapter › Chapter › peer-review
Machine learning in advancing anode materials for Lithium-Ion batteries – A review.
Islam, M. A., Ahsan, Z., Rahman, M., Abdullah, M., Rana, M., Hossain, N., & Chowdhury, M. A. (2024). Machine learning in advancing anode materials for Lithium-Ion batteries – A review. Inorganic Chemistry Communications, 113577. https://doi.org/10.1016/j.inoche.2024.113577
Research output : Contribution to journal › Article › peer-review
DFT Insights into the Mechanical Properties of NMs.
Islam, M. A., Hossain, N., Ahsan, Z., Rana, M., Rahman, M., & Abdullah, M. (2025). DFT Insights into the Mechanical Properties of NMs. Results in Surfaces and Interfaces, 100417. https://doi.org/10.1016/j.rsurfi.2025.100417
Research output : Contribution to journal › Article › peer-review
Nanotechnology and thermodynamics: a comprehensive review
Rahman, M., Rimon, M. I. H., Hasan, Z., Oliullah, M. S., Rabbi, S. M. F., Mobarak, M. H., & Hossain, N. (2025). Nanotechnology and thermodynamics: a comprehensive review. Nanomaterials and Energy, 14(2), 1–26. https://doi.org/10.1680/jnaen.24.00093
Research output : Contribution to journal › Article › peer-review
Md. Sohel Rana
Assistant Professor
S.S. Khaleduzzaman, R. Saidur, J. Selvaraj, I.M. Mahbubul, M.R. Sohel, I.M. Shahrul, Nanofluids for Thermal Performance Improvement in Cooling of Electronic Device. International Conference on Nano-Scitech 2013, Advanced Materials Research, 832 (2014) 218-223.
Research output : Contribution to conference
M.M. Elias, R. Saidur, N.A. Rahim, M.R. Sohel, I.M. Mahbubul, Performance Investigation of a Plate Heat Exchanger Using Nanofluid with Different Chevron Angle. International Conference on Nano-SciTech 2013, Advanced Materials Research, 832 (2014) 254-259.
Research output : Contribution to conference
M.R. Sohel, R. Saidur, M.F.M. Sabri, M.M. Elias, S.S. Khaleduzzaman, Investigation of Heat Transfer Performances of Nanofluids Flow through a Circular Minichannel Heat Sink for Cooling of Electronics. International Conference on Nano-Scitech 2013, Advanced Materials Research, 832 (2014) 166-171.
Research output : Contribution to conference
S.S. Khaleduzzaman, M.R. Sohel, R. Saidur, J. Selvaraj, Convective performance of 0.1 % volume fraction of TiO2/water nanofluid in an electronic heat sink. 6th BSME International Conference on Thermal Engineering (ICTE 2014), Procedia Engineering, 105 (2015) 412-417.
Research output : Contribution to conference
S.S. Khaleduzzaman, M.R. Sohel, R. Saidur, J. Selvaraj, Stability of Al2O3-water Nanofluid for Electronics Cooling System. 6th BSME International Conference on Thermal Engineering (ICTE 2014), Procedia Engineering, 105 (2015) 406-411.
Research output : Contribution to conference
F.S. Javadi, S. Sadeghipour, R. Saidur, G. BoroumandJazi, B. Rahmati, M.M. Elias and M.R. Sohel, The effects of nanofluid on thermophysical properties and heat transfer characteristics of a plate heat exchanger. International Communications in Heat and Mass Transfer, 44 (2013) 58-63.
Research output : Contribution to journal
M.M. Elias, M. Miqdad, I.M. Mahbubul, R. Saidur, M. Kamalisarvestani, M.R. Sohel, A. Hepbasli, N.A. Rahim and M.A. Amalina, Effect of nanoparticle shape on the heat transfer and thermodynamic performance of a shell and tube heat exchanger. International Communications in Heat and Mass Transfer, 44 (2013) 93-99.
Research output : Contribution to journal
M.R. Sohel, R. Saidur, N.H. Hassan, M.M. Elias, S.S. Khaleduzzaman and I.M. Mahbubul, Analysis of entropy generation using nanofluid flow through the circular microchannel and minichannel heat sink. International Communications in Heat and Mass Transfer, 46 (2013) 85-91.
Research output : Contribution to journal
M.R. Sohel, R. Saidur, M.F.M. Sabri, M. Kamalisarvestani, M.M. Elias and A. Ijam, Investigating the heat transfer performance and thermophysical properties of nanofluids in a circular micro-channel. International Communications in Heat and Mass Transfer, 42 (2013) 75-81.
Research output : Contribution to journal
S.S. Khaleduzzaman, R. Saidur, I.M. Mahbubul, T.A. Ward, M.R. Sohel, I.M. Shahrul, J. Selvaraj, M.M. Rahman, Energy, Exergy and Friction Factor Analysis of Nanofluid as a Coolant for Electronics. Industrial & Engineering Chemistry Research, 53 (2014) 10512-10518.
Research output : Contribution to journal
M.M. Elias, I.M. Mahbubul, R. Saidur, M.R. Sohel, I.M. Shahrul, S.S. Khaleduzzaman, S. Sadeghipour, Experimental investigation on the thermo-physical properties of Al2O3 nanoparticles suspended in car radiator coolant. International Communications in Heat and Mass Transfer, 54 (2014) 48-53.
Research output : Contribution to journal
S.S. Khaleduzzaman, M.R. Sohel, R. Saidur, I.M. Mahbubul, I.M. Shahrul, B.A. Akash, J. Selvaraj, Energy and exergy analysis of alumina-water nanofluid for an electronic liquid cooling system. International Communications in Heat and Mass Transfer, 57 (2014) 118-127.
Research output : Contribution to journal
M.R. Sohel, S.S. Khaleduzzaman, R. Saidur, A. Hepbasli and M. F. M. Sabri, An experimental investigation of heat transfer enhancement of a minichannel heat sink using Al2O3-H2O nanofluid. International Journal of Heat and Mass Transfer, 74 (2014) 164–172.
Research output : Contribution to journal
M.R. Sohel, R. Saidur, S.S. Khaleduzzaman and T.A. Ibrahim, Cooling performance investigation of electronics cooling system using Al2O3–H2O nanofluid. International Communications in Heat and Mass Transfer, 65 (2015) 89–93.
Research output : Contribution to journal
S.S. Khaleduzzaman, M.R. Sohel, I.M. Mahbubul, R. Saidur, J. Selvaraj, Exergy and entropy generation analysis of TiO2–water nanofluid flow through the water block as an electronics device. International Journal of Heat and Mass Transfer, 101 (2016) 104–111.
Research output : Contribution to journal
S.S. Khaleduzzaman, I.M. Mahbubul, M.R. Sohel, R. Saidur, J. Selvaraj, T.A. Ward, M.E. Niza, Experimental analysis of energy and friction factor for titanium dioxide nanofluid in a water block heat sink. International Journal of Heat and Mass Transfer, 115 (2017) 77–85.
Research output : Contribution to journal
Md. Mizanur Rahman, Mustafizur Rahman, Masud Rana, Ahmed Farhan, M.R. Sohel, and Mohammad Mashud, Investigate How Inlet Geometry Affects Vortex Power. Proceedings of the 6th Industrial Engineering and Operations Management Bangladesh Conference Dhaka, Bangladesh, IEOM Society International, December 26-28, 2023.
Research output : Contribution to conference
M. Rahman, M.M. Rahman, M.R. Sohel, A. Farhan, E. Huq, F. Mahbub, (2024). Conclusion and Future Trends of Mechatronics. In: M.M. Rahman, F. Mahbub, R. Tasnim, R.U. Saleheen, (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore.
Research output : Contribution to book
Mustafizur Rahman, Md. Mizanur Rahman, Masud Rana, Zahid Ahsan and M.R. Sohel, "Implementing on IoT dashboard to control boiling and cooling systems in manufacturing industries", 7th IEOM Bangladesh Conference, 2024.
Research output : Contribution to conference
Zahid Ahsan, Mustafizur Rahman, Masud Rana, M.R. Sohel and Md. Mizanur Rahman, "Optimizing Manufacturing Processes and Production through the Strategic Use of Additional Cutting Tools in Injection Molding Machine", 7th IEOM Bangladesh Conference, 2024.
Research output : Contribution to conference
Enamul Hoq
Assistant Professor
Development of an Automatic Fire Detecting & Fire Fighting Robot
Research output : Contribution to conference
Design and Construction of an Obstacle Avoiding Line Follower Luggage Carrying Robot
Research output : Contribution to conference
Saleheen, R. U., Ahmed Farhan, Enamul Hoq, & Farhan Mahbub. (2023). Design and Construction of an Automated Flood Intimation System. International Journal of Integrative Research, 1(6), 377–384. https://doi.org/10.59890/ijir.v1i6.74 
Research output : Contribution to journal
Md. Shamsuzzaman, Mohammad Mashud, Md. Mizanur Rahman, Md. Mostafizur Rahman, Enamul Hoq & Dip Das Management and Maintenance of Textile Machinery https://link.springer.com/chapter/10.1007/978-981-99-2142-3_2
Research output : Contribution to journal
S Shahria, MH Ullah, M Mashud, AH Mokther, E Hoq, MM Rahman Effect of Temperature and Solar Panel Position on Solar PV System Performance: A Review https://doi.org/10.38208/ete.v2.729
Research output : Contribution to journal
Enamul Hoq Jowad Md Madha, Anika Nawar Design and Construction of an Obstacle Avoiding Line Follower Luggage Carrying Robot 5th International Conference on Industrial & Mechanical Engineering and Operations Management, Dhaka, Bangladesh, December 26-27, 2022
Research output : Contribution to journal
Enamul Hoq, Abu Salman Shaikat, Rezwan us Saleheen, Dr. Md. Mizanur Rahman,Farhan Mahbub,Rumana Tasnim  Study on Development of an Automatic Wind Turbine System 2nd International Conference on Mechanical Engineering and Applied Sciences (ICMEAS),MIST, 2022
Research output : Contribution to journal
Design and Development of an Automatic Floor Cleaner Robot
Research output : Contribution to conference
Mahbub, F., Hoq, E., Saleheen, R.U., Farhan, A., Erin, M.T.U.R., Rahman, M. (2024). Control System in Mechatronics Engineering. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_3
Research output : Contribution to book
Akbar, N.I., Barua, P., Shithil, S.M., Saleheen, R.U., Mahbub, F., Hoq, E. (2024). Case Studies: Application of Mechatronics Engineering. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_9
Research output : Contribution to book
Shamsuzzaman, M., Mashud, M., Rahman, M.M., Rahman, M.M., Hoq, E., Das, D. (2023). Management and Maintenance of Textile Machinery. In: Rahman, M.M., Mashud, M., Rahman, M.M. (eds) Advanced Technology in Textiles. Textile Science and Clothing Technology. Springer, Singapore. https://doi.org/10.1007/978-981-99-2142-3_2
Research output : Contribution to book
Ramesha, N.Z., Saagoto, S., Zonayed, M., Jhara, S.S., Tasnim, R., Huq, E. (2024). Sensors and Actuators. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_2
Research output : Contribution to book
Rahman, M., Rahman, M.M., Sohel, M.R., Farhan, A., Huq, E., Mahbub, F. (2024). Conclusion and Future Trends of Mechatronics. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_10
Research output : Contribution to book
E. Hoq, S. Paul and M. T. U. R. Erin, "Development of a QR-Code Based Smart Car Parking System," 2019 5th International Conference on Advances in Electrical Engineering (ICAEE), Dhaka, Bangladesh, 2019, pp. 275-279, doi: 10.1109/ICAEE48663.2019.8975536.
Research output : Contribution to conference
Madha, J., Nawar, A., & Hoq, M. (2022, December). Design and Construction of an Obstacle Avoiding Line Follower Luggage Carrying Robot. In 5th International Conference in Industrial and Mechanical Engineering and Operations Management (IMEOM), https://doi.org/10.46254/BD05.20220051.
Research output : Contribution to conference
Hussein, M., Tasnim, R., Hoq, M., & Mahbub, F. (2023, December). IOT and GSM Integrated Automated Water Pump Controlling System for Prevention of Water Wastage. In 6th Industrial Engineering and Operations Management Bangladesh Conference, https://doi.org/10.46254/BA06.20230106.
Research output : Contribution to conference
Rahman, M., Hoq, M., Saagoto, M., Mahbub, F., Barua, P., & Mashud, M. (2023, December). Examine How a Turbine Ventilator Affects Chimney Performance. In 6th Industrial Engineering and Operations Management Bangladesh Conference, https://doi.org/10.46254/BA06.20230126.
Research output : Contribution to conference
Rahman, M., Mashud, M., Hoq, E., and Islam, M., 2024, December. Development of a wiper and sweeper robot. In 7th IEOM Bangladesh International Conference on Industrial Engineering and Operations Management, https://doi.org/10.46254/BA07.20240023.
Research output : Contribution to conference
Ahmed Farhan
Sr. Lecturer
Introduction to Mechatronics
Farhan, A., Barua, P., Saleheen, R.U., Tasnim, R., Rahman, M.M. and Rahman, M., 2024. Introduction to Mechatronics. In Mechatronics: Fundamentals and Applications (pp. 1-19). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Article › peer-review
Control System in Mechatronics Engineering
Mahbub, F., Hoq, E., Saleheen, R.U., Farhan, A., Erin, M.T.U.R. and Rahman, M., 2024. Control System in Mechatronics Engineering. In Mechatronics: Fundamentals and Applications (pp. 49-80). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Article › peer-review
Robotics in Mechatronics Engineering
Erin, M.T.U.R., Farhan, A., Barua, P., Akbar, N.I., Saleheen, R.U. and Saagoto, M.S., 2024. Robotics in Mechatronics Engineering. In Mechatronics: Fundamentals and Applications (pp. 81-100). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Article › peer-review
IOT Architecture and its Integration with Mechatronics
Tasnim, R., Hussein, M.R., Hasan, M.K., Islam, S., Akhter, F. and Farhan, A., 2024. IOT Architecture and its Integration with Mechatronics. In Mechatronics: Fundamentals and Applications (pp. 101-124). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Article › peer-review
Machine Learning and Artificial Intelligence
Sadatuzzaman Saagoto, M., Farhan, A., Barua, P., Hussain, I., Hasan, K. and Hasan, T., 2024. Machine Learning and Artificial Intelligence. In Mechatronics: Fundamentals and Applications (pp. 125-141). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Article › peer-review
Emerging Applications of Mechatronics
Saleheen, R.U., Farhan, A., Ramesha, N.Z., Tasnim, R., Erin, M.T.U.R. and Shahria, S., 2024. Emerging Applications of Mechatronics. In Mechatronics: Fundamentals and Applications (pp. 143-160). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Article › peer-review
Conclusion and Future Trends of Mechatronics
Rahman, M., Rahman, M.M., Sohel, M.R., Farhan, A., Huq, E. and Mahbub, F., 2024. Conclusion and Future Trends of Mechatronics. In Mechatronics: Fundamentals and Applications (pp. 209-224). Singapore: Springer Nature Singapore.
Research output : Contribution to chapter › Article › peer-review
An approach for classifying ECG arrhythmias by feature extraction method
Farhan, A., Islam, M.S. and Hossain, S.M., 2013. An approach for classifying ECG arrhythmias by feature extraction method (Undergraduate dissertation, Department of Electrical and Electronic Engineering, Islamic University of Technology (IUT), Board Bazar, Gazipur-1704, Bangladesh).
Research output : Contribution to journal › Article › not peer-review
Numerical analysis of a Throttle Valve: Unlined V/S Lined Valve Seat
Pooneeth, V., He, X., Haihang, W., Liye, J., Shreka, M., & Farhan, A., 2018. Numerical analysis of a Throttle Valve: Unlined V/S Lined Valve Seat. In ISER-418th International Conference on Heat Transfer and Fluid Flow (ICHTFF), Dublin, Ireland.
Research output : Contribution to conference › Article › peer-review
Design and Construction of an Automated Flood Intimation System
Saleheen, R.U., Farhan, A., Hoq, E. and Mahbub, F., 2023. Design and Construction of an Automated Flood Intimation System.
Research output : Contribution to journal › Article › peer-review
A qualitative overview of fuzzy logic in ECG arrhythmia classification
Farhan, A., Wei, C.L. and Ahmed, M.T., 2018. A qualitative overview of fuzzy logic in ECG arrhythmia classification. International Journal of Engineering Works, 5(11), pp.232-239.
Research output : Contribution to journal › Article › peer-review
De-noising of an Image using Fuzzy Inference System and Performance Comparison with the Conventional System
Farhan, A., us Saleheen, R., Wei, C.L. and Mahbub, F., 2021. De-noising of an Image using Fuzzy Inference System and Performance Comparison with the Conventional system. Journal of Engineering Advancements, 2(03), pp.164-168.
Research output : Contribution to journal › Article › peer-review
Computer Vision-based Automated Attendance System using Face Recognition
Shaikat, A. S., Hussein, M. R., Tasnim, R., Farhan, A., Khan, A. M. S., Mokhtar, A. H., Rahman, M. M., 2023, Computer Vision based Automated Attendance System using Face Recognition, 6th Industrial Engineering and Operations Management Bangladesh Conference, Dhaka, Bangladesh
Research output : Contribution to conference › Article › peer-review
IOT and GSM Integrated Automated Water Pump Controlling System For Prevention of Water Wastage
Tasnim, R., Hussein, M. R., Farhan, A., Saleheen, RU., Zonayed, M., Hoq, E., Mahbub, F., Rahman, M. M., 2023. IOT and GSM Integrated Automated Water Pump Controlling System For Prevention of Water Wastage, 6th Industrial Engineering and Operations Management Bangladesh Conference Dhaka, Bangladesh
Research output : Contribution to conference › Article › peer-review
Investigate How Inlet Geometry Affects Vortex Power
Rahman, M.M., Rahman, M., Rana, M., Farhan, A., Sohel, M.R. and Mashud, M., 2023. Investigate how inlet geometry affects vortex power. In 6th Industrial Engineering and Operations Management Bangladesh Conference(pp. 721-729). IEOM Society Organisation. https://doi. org/10.46254/BA06 (Vol. 20230127).
Research output : Contribution to conference › Article › peer-review
Tarazul Mulk Syed Anzam Hossain
Sr. Lecturer
Instrumental Characterization of Ceramic Fiber Raw Material for Heat Insulation
Research output : Contribution to conference › Paper › peer-review
Characterization of Heat Insulating Ceramic Fiber Raw Material for Insulation
4th International Conference on Sustainable Technologies for Industry 4.0 (STI 2022), Saturday 17-18 December 2022
Research output : Contribution to conference › Paper › peer-review
CHARACTERIZATION OF NANOSTRUCTURE SEDIMENTARY CLAY MATERIAL OF NETROKONA DISTRICT
7th International Conference on Engineering Research, Innovation and Education School of Applied Sciences & Technology, SUST, Sylhet, (ICERIE 2023), January 12-14
Research output : Contribution to conference › Paper › peer-review
Characterization of Heat Insulating Ceramic Fiber Raw Material for Insulation
Vol.23 Special Issue 2023, Hossain, T. M. S. A., & Hasanuzzaman, M. (2023). Characterization of Heat-Insulating Ceramic Fiber Raw Material for Insulation. Chemical Engineering Research Bulletin, 23(10), 91–96., DOI: 10.3329/cerb.v23i10.78507
Research output : Contribution to conference › Paper › peer-review
CHARACTERIZATION AND BENEFICIATION OF AVAILABLE SEDIMENTARY CLAY COLLECTED FROM NETROKONA DISTRICT FOR INDUSTRIAL APPLICATION
7th International Conference on Mechanical Engineering and Renewable Energy 2023 (ICMERE2023) 16-18 November 2023, Chattogram, Bangladesh
Research output : Contribution to conference › Paper › peer-review
Characterization and Quality Investigation of Layered Clay of Durgapur
Research output : Contribution to conference › Paper › peer-review
CLAYS AS ADVANCE MATERIAL: NANOMATERIAL PERSPECTIVE
Research output : Contribution to conference › Paper › peer-review
Characterization of Available Sedimentary Clay of Hobiganj District
https://my.easychair.org/publications/preprint/dh6S/open?utm_source=chatgpt.com
Research output : Contribution to conference › Paper › peer-review
"Fabrication and Characterization of NiO-doped BaTiO3 for Multilayer Ceramic Capacitor"
DOI: 10.1109/ICECE.2018.8636772, IEEE Xplore Digital Library is a Research Database, ISBN Information: Electronic ISBN:978-1-5386-7482-6 Print on Demand(PoD) ISBN:978-1-5386-7483-3
Research output : Contribution to conference › Paper › peer-review
Subrata Saha
Lecturer
Analysis of Mechanical Behavior in Carbon Fiber Powder Reinforced High Density Polyethylene without Filler Addition and its Application
Paper ID 2025051071
Research output : Contribution to conference › Article › peer-review
Recent developments and diverse applications of high melting point materials
Research output : Contribution to journal › Article › peer-review
Banana and bamboo filler-reinforced epoxy resin composites: Analysis of mechanical and physical properties
Research output : Contribution to journal › Article › peer-review
Advances in Gas Circulation Line Leakage Management in Bangladesh: Development and Solutions
Research output : Contribution to journal › Article › peer-review
Performance Analysis and Cost Effectiveness of Modified Vacuum Systems for Industrial Applications
Research output : Contribution to conference › Article › peer-review
Advancements in Propulsion Systems for Rocket Engines: A Review
Research output : Contribution to journal › Article › peer-review
Md Shariful Islam
Lecturer
Study on Development of an Automatic Wind Turbine System
Research output : Contribution to conference › Paper › peer-review
Modify, Testing and Analysis of a Vertical Axis Wind Turbine for Low Wind Speed
Research output : Contribution to journal › Paper › peer-review
Advances and Significance of Nanowires in Semiconductor Applications
Research output : Contribution to journal
Development of a wiper and sweeper robot
Research output : Contribution to conference
Zayeed Bin Mamun
Lecturer
Input parameterized physics informed neural networks for de noising, super-resolution, and imaging artifact mitigation in time resolved three dimensional phase-contrast magnetic resonance imaging
Pashaei Kalajahi, A., Csala, H., Naderi, F., Mamun, Z., Yadav, S., Amili, O., Arzani, A., & D’Souza, R. (2024). Input parameterized physics informed neural network for advanced 4D flow MRI processing. Engineering Applications of Artificial Intelligence, 150. 110600. https://doi.org/10.2139/ssrn.4700974
Research output : Contribution to journal › Article › peer-review
Towards chemical source tracking and characterization using physics-informed neural networks
Naderi, F., Perez-Raya, I., Yadav, S., Kalajahi, A. P., Mamun, Z. B., & D’Souza, R. M. (2024). Towards Chemical Source Tracking and characterization using physics-informed Neural Networks. Atmospheric Environment, 334, 120679. https://doi.org/10.1016/j.atmosenv.2024.120679
Research output : Contribution to journal › Article › peer-review
Yusuf Ali
Lecturer
Ceramic coating on Mg alloy for enhanced degradation resistance as implant materials
Research output : Contribution to journal › Paper › peer-review
Synthesis and characterization of biocompatible hybrid coating on WE54 Mg alloy for implant applications
Research output : Contribution to journal › Paper › peer-review
Physical and electrochemical performances of novel tellurium composite films as anode applications in energy storage systems
Research output : Contribution to journal › Paper › peer-review
Enhancing Mechanical and Surface Properties of 3D-Printed Kevlar- Reinforced ABS/PLA Composites through FDM Process
Research output : Contribution to journal › Paper › peer-review
Fabrication and characterization of PLA-based Biopolymer Composite for Biomedical Applications
Research output : Contribution to journal › Paper › not peer-review
Taher Hasan Nakib
Lecturer
Advancements of Novel Thermodynamic Cycles in Ocean Thermal Energy Conversion (OTEC) and Their Future Prospects in Malaysia
NAKIB, T. H., HASANUZZAMAN, M., RAHIM, N. Modeling,Advancements of Novel Thermodynamic Cycles in Ocean Thermal Energy Conversion (OTEC) and Their Future Prospects in Malaysia. IOP Conference Series: Earth and Environmental Science (International Conference on Sustainable energy, Infrastructure and Environment, ICSEIE)
Research output : Contribution to conference › Article › peer-review
Global challenges of ocean thermal energy conversion and its prospects: a review
NAKIB, T. H., HASANUZZAMAN, M., RAHIM, N., HABIB, M. A., ADZMAN, N. N. & AMIN, N. 2025. Global challenges of ocean thermal energy conversion and its prospects: a review. Journal of Ocean Engineering and Marine Energy, 11, 197-231
Research output : Contribution to journal › Article › peer-review
Advancements, challenges, and prospects of cost-effective electric vehicles: A review
MOJUMDER, M., NAKIB, T. H., HASANUZZAMAN, M. & ABDEL-KHALIK, A. 2025. Advancements, challenges, and prospects of cost-effective electric vehicles: A review. Alexandria Engineering Journal, 128, 437-456
Research output : Contribution to journal › Article › peer-review
Energy and economic analysis of an ocean thermal energy conversion plant for Bangladesh: A case study
Rashid, A., Nakib, T.H., Shahriar, T., Habib, M.A. and Hasanuzzaman, M., 2024. Energy and economic analysis of an ocean thermal energy conversion plant for Bangladesh: A case study. Ocean Engineering, 293, p.116625.
Research output : Contribution to journal › Article › peer-review
Conventional and Emerging CSP Technologies and Design Modifications: Research Status and Recent Advancements
Alam, M.I., Nuhash, M.M., Zihad, A., Nakib, T.H. and Ehsan, M.M., 2023. Conventional and emerging CSP technologies and design modifications: research status and recent advancements. International Journal of Thermofluids, 20, p.100406.
Research output : Contribution to journal › Article › peer-review
Modeling, Energy Analysis and Feasibility Assessment of Ocean Thermal Power Plant in Malaysia
NAKIB, T. H., HASANUZZAMAN, M., RAHIM, N. Modeling, Energy Analysis and Feasibility Assessment of Ocean Thermal Power Plant in Malaysia. Renewable Energy (Under review)
Research output : Contribution to journal › Article › peer-review
Protik Barua
Lecturer
Protik Barua, Miraiz Hossain, Ifthekar Hossain. (2024). An analysis of machine maintenanceprediction using machine learning. ICMIME 2024 – International Conference on Mechanical,Industrial and Materials Engineering.
Research output : Contribution to conference
Ifthekar Hossain, Protik Barua, Fahim Uddhin. (2024). A MULTI-MODAL DEEP LEARNINGFRAMEWORK FOR DISASTER RESPONSE. 2024 IEEE conference on Computing,Application andsystems(COMPAS).
Research output : Contribution to conference
Rahman, Md Mizanur, Md Enamul Hoq, Md. Sadatuzzaman Saagoto, Farhan Mahbub,Protik Barua, and Mohammad Mashud. "Examine How a Turbine Ventilator AffectsChimney Performance." In 6th Industrial Engineering and Operations ManagementBangladesh Conference. 2023, 
Research output : Contribution to conference
A. Farhan, Protik Barua, R. U. Saleheen, R. Tasnim, M. M. Rahman, and M. Rahman,"Introduction to mechatronics," in Mechatronics: Emerging Trends in Mechatronics, M. M.Rahman, F. Mahbub, R. Tasnim, and R. U. Saleheen, Eds. Singapore: Springer, 2024.
Research output : Contribution to book
E. M. T. U. R. Erin, A. Farhan, P. Barua, N. I. Akbar, R. U. Saleheen, and M. S. Saagoto, "Robotics in mechatronics engineering," in Mechatronics: Emerging Trends in Mechatronics, M. M. Rahman, F. Mahbub, R. Tasnim, and R. U. Saleheen, Eds. Singapore: Springer, 2024. 
Research output : Contribution to book
S. M. Saagoto, A. Farhan, P. Barua, I. Hussain, K. Hasan, and T. Hasan, "Machine learning and artificial intelligence," in Mechatronics: Emerging Trends in Mechatronics, M. M. Rahman, F. Mahbub, R. Tasnim, and R. U. Saleheen, Eds. Singapore: Springer, 2024. https://doi.org/10.1007/978-981-97-7117-2_6.
Research output : Contribution to book
N. I. Akbar, Protik Barua, S. M. Shithil, R. U. Saleheen, F. Mahbub, and E. Hoq, "Case studies: Application of mechatronics engineering," in Mechatronics: Emerging Trends in Mechatronics, M. M. Rahman, F. Mahbub, R. Tasnim, and R. U. Saleheen, Eds. Singapore: Springer, 2024. https://doi.org/10.1007/978-981-97-7117-2_9.
Research output : Contribution to book
Md. Sadatuzzaman Saagoto
Lecturer
Machine Learning and Artificial IntelligenceSadatuzzaman Saagoto, M., Farhan, A., Barua, P., Hussain, I., Hasan, K., Hasan, T. (2024). Machine Learning and Artificial Intelligence. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_6
Research output : Contribution to book
Sensors and ActuatorsRamesha, N.Z., Saagoto, S., Zonayed, M., Jhara, S.S., Tasnim, R., Huq, E. (2024). Sensors and Actuators. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_2
Research output : Contribution to book
Robotics in Mechatronics EngineeringErin, M.T.U.R., Farhan, A., Barua, P., Akbar, N.I., Saleheen, R.U., Saagoto, M.S. (2024). Robotics in Mechatronics Engineering. In: Rahman, M.M., Mahbub, F., Tasnim, R., Saleheen, R.U. (eds) Mechatronics. Emerging Trends in Mechatronics. Springer, Singapore. https://doi.org/10.1007/978-981-97-7117-2_4
Research output : Contribution to book
Khairun Nasrin Rimi
Lecturer
Enhancing formula student car performance: Nose shape optimization via adjoint method
Research output : Contribution to journal
Optimizing Aerodynamic Performance of Selig S3014 Airfoil through Dimensional Parametric Analysis
Research output : Contribution to conference
Magnetic nanoparticles: Synthesis, characterization and applications
Research output : Contribution to book
Biobased composites for advanced applications: Possibilities and difficulties on the path to circularity
Research output : Contribution to book
Meghdeepa Choudhury
Lecturer
Pre-renovation considerations for a Swedish single family house: Analysis of energy saving potential.
Research output : Contribution to conference