Dr. Md. Shawkut Ali Khan has an impressive
academic and professional background in Mechanical Engineering. He joined in
“world university of Bangladesh” in the Department of MTE on 1st
July as a professor. He completed his PhD and M.Sc. engineering in Mechanical
Engineering at Kanazawa University, Japan. He completed his B.Sc. engineering
from Chittagong University of Engineering & Technology (CUET). After completing his PhD, he worked as a
Mechanical Analyst in Fuji Techno Solution, Kanagawa, Japan. After that he
worked different reputed universities. Last he was Dean, faculty of Science
& Engineering and head, department of mechanical engineering in city
university.
Dr. Khan has a distinguished teaching career
spanning more than 15 years, during which he has contributed significantly to
academia. He has authored over thirty papers in international journals,
reflecting his research contributions and intellectual prowess.
His leadership experience and academic
achievements make him a valuable asset to "World University of
Bangladesh," where he aims to leverage his expertise to foster the
university's growth collaboratively with his colleagues.
Md. Shawkut ALI KHAN, Koetsu YAMAZAKI, Kosuke
ODA and Kazuhiko HIROOKA, “Simplified Deformation Analysis of 3D-bodyby
First Order Analysis”Journal of Advanced Mechanical Design, Systems, and
Manufacturing, JSME, vol. 1 (2007), No. 4, pp. 505-517.
Anmona Shabnam Pranti, Arif
Mohammad Shahed Iqubal, Md. Shawkut Ali
Khan, Mohammad Kayesar Ahmed “Scenario of electricity trading in South
Asia: Perspective and feasibility of trading between
India and Bangladesh” American Journal of
Electrical Power and Energy Systems, Science Publication Group, 2013; 2(6): pp.
156-165.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. A Comparative Study of Non- Frost Refrigerator Over the Frost Refrigerator
in Economical and Environmental Perspective. The Millennium University Journal,
Vol. 5 (2020), No. 1, pp. 37-42
Monowar Wadud Hridoy, Md. Shawkut Ali Khan, Mahibuzzaman,
“Experimental Study of Recycling of used engine
oil utilizing various
acids as washing agent”, BAUET Journal, Volume 03,
Issue 01, 2021, pp. 19-27.
Al-Amin Shuvo,
Ziaul Islam, Md.
Shawkut Ali Khan “Design of a Solar PV
based Hybrid AC mini grid System with Load Dispatch
Centre for an Off-grid Area of
Bangladesh”, International Journal of Innovative Research in Electrical,
Electronics, Instrumentation and control Engineering, Vol-9, Issue-7,
July-2021, DOI- 10.17148/IJIREEICE.2021.9721
Asrafusjaman Rubel , M. A.
Kabir, Masud Rana, Ariful Islam, Md.
Shawkut Ali Khan “Characterization Analysis of Textured and Diffused
Monocrystalline Silicon Wafer”, European
Scientific Journal, Vol.17 (2021), No.17, pp. 125-132.
Md Iftakharul Muhib, Md. Shawkut Ali Khan, Rifat
Akter.“Risk Prioritization of
Environmental Aspects and Occupational Health Safety in Textile Industries of
Gazipur Industrial Area, Bangladesh”, Bangladesh Journal of Multidisciplinary
Scientific Research, Vol. 2 (2021), No. 2, pp. 11-20.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib, Md. Kawsar Sajib.
“Disseminating an Automated Irrigation System Using
Solar Energy in Perspective of Bangladesh”,American
International Journal of Sciences and Engineering Research, Vol. 4 (2021), No.
1, pp. 14-25
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. “Disseminating the effect of water hardness on dyeing of cotton
fabric with reactive dyes”, Journal of Biodiversity and Environmental Science,
Vol. 19 (2021), No. 1, pp. 125-133.
Md. Iftakharul Muhib,
RifatAkter, Md. Humaun Kabir, Md.
Shawkut Ali Khan, Md. Shamim Rayhan. “Disseminating the Biomedical Waste
Generation Scenario During COVID-19: An Overview from the Lower Middle Income
Country Bangladesh”, American International Journal of Nursing Education and Practice, Vol. 2
(2021), No. 1, pp. 7-14.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib.
“A Comparative Study of VRF Air
Conditioning System over the Conventional Domestic Air-Conditioning System,
The Millennium University Journal, Vol. 6 (2022), No. 1, pp.41-58.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. “Analyzing the Best Quality
Parameter of Die-Casting Products”, American
International Journal of Sciences and Engineering Research, Vol. 5 (2022), No.
1, pp. 1-7.
Md. Shawkut Ali Khan, Md. Iftakharul Muhib. A comparative study of multistoried building information modelling (BIM) method & conventional modelling method. American International Journal of Sciences and Engineering Research, Vol. 5 (2022), No. 1, pp. 8-15
Md. Iftakharul Muhib, Md. Shawkut Ali Khan. An overview of health and environmental
threats from the brick kiln industry around the capital of Bangladesh. American
International Journal of Sciences and Engineering Research, Vol. 5 (2022), No.
1, pp. 16-22.
Md.
Shawkut Ali Khan, Md Iftakharul Muhib, Mahdee Nafis.
Thermoelectric Power Generation from Waste Heat of Gas Stove by Using the
Thermoelectric Generator. American International Journal of Sciences and
Engineering Research, Vol. 5 (2022), No. 1, pp. 23-30.
Md.
Shawkut Ali Khan, Md Iftakharul Muhib. Simulating the
Drag Reduction Model for a Vehicle by Using Vortex Generator. American
International Journal of Sciences and Engineering Research, Vol. 5 (2022),
No.1, pp. 31-45.
Md.
Shawkut Ali Khan, Analytical Examination of
Nano-Fluid-Assisted Cooling Rate Enhancement in a Car Radiator, American
International Journal of Sciences and Engineering Research, Vol. 6 (2023),
No.1, pp. 1-14.
Md. Shawkut Ali Khan, A CFD Analysis for Evaluating Thermal Performance of Earth
Air Tunnel Heat Exchanger, World Journal of Engineering Research and
Technology, Vol.10 (2024), No. 1, pp. 121-140.
Md. Shawkut Ali Khan, Introducing
Firefighting Robot Utilizing GSM Technology, ESP International Journal of
Advancements in Science & Technology, Vol.02(2024), No.1, pp. 27-38.
Abdullah Md, Galib MT, Md. Shawkut Ali Khan, Rahman
T, Hossain MM. Recent advancements in flow control
using plasma actuators and plasma vortex
generators. Heat Transfer.
Monowar Wadud Hridoy, Md. Shawkut Ali Khan, Rana Ahmad, Md.
Abdur Rahman,C.H.M. Imran Kadir, “Experimental Analysis of Heat Transfer
Improvementof Water Utilizing Double Counter Twisted Tape Insert”,
International Conference on Mechanical, Industrial & Energy Engineering
2020, 19-21 December,2020, Khulna, BANGLADESH, ICMIEE20-206.
Mehedi Hasan, Sunjida Haque,
Md. Shawkut Ali Khan, Md. Kamrul
Alam Khan, “Mechanical Modeling
of Dynamic Electrolyte Model: A Biomass
based Nano- leveled Electricity Generation Plant”, Proc.
of National Conference on Physics – 2019,
Nabab Nawab Ali Chowdhury(NNAC) Senate Bhaban, University of Dhaka, Dhaka.
07-09 February, 2019, pp. 167.
Md. Quamruzzaman and Md. Shawkut
Ali Khan, “Nucleonic Control System and
its Applications in Bangladesh (A Case Study)” Proc. of the 2nd
international conference on engineering education for sustainable development,
ICEESD 2009, pp EEE-03.
Mir Mohiuddin and Md. Shawkut Ali Khan “Solar
Photovoltaic Water Pumping for Small Scale Irrigation in Bangladesh” Proc. of the
2nd international conference on engineering education for
sustainable development, ICEESD 2009, pp MTE-11.
Sankeor kumer Debnath and Md. Shawkut Ali Khan, “ComparativeStudy
of Elastic-Plastic properties of Bulk, Micro, and Nano Materials” Proc. of the
2nd international conference on engineering education for
sustainable development, ICEESD 2009, pp MTE-13.
Md. Shawkut Ali Khan, SankeorkumerDebnath, Md. Mofazzal Hossain and Mir
Mohiuddin, “A comparative Study on Diesel Engine and Converted Compressed
Natural Gas (CNG) Engine; Bangladesh Perspective” Proc. of the 2nd international
conference on engineering education for sustainable development, ICEESD 2009,
pp MTE-14
Koetsu YAMAZAKI, Kazuhiko
HIROKA, KousukeODA, and Md. Shawkut Ali
khan,“Development of Simplified Deformation Analysis for 3D-First Order
Analysis – Consideration of element stiffness derivation via displacement-base
strain energy expression -” Proc. of the 16th Design Engineering
& System Division Conference, JSME, No.06-33, pp. 158-161.
Koetsu YAMAZAKI, Kousuke
ODA, Md. Shawkut Ali khan, and
Kazuhiko HIROKA, “Development of Simplified Deformation Analysis for 3D-First
Order Analysis” Proc. of the 15th Design Engineering & System Division
Conference, JSME, No.05-27,
pp. 445-448
Koetsu YAMAZAKI, Kousuke
ODA, and Md. Shawkut Ali khan,
“Simplified Deformation Analysis for 3D-First Order Analysis”, Proc. of the 14th Design
Engineering & System Division Conference, JSME, No.04-38, pp. 219-220.
Md. Shawkut Ali khan and Koetsu YAMAZAKI “Modeling Method of
StressConcentrated Members for First Order Analysis –3rd Report:
Approximation of 3Dmembers-”, Proc.
of the 14th Design Engineering & System Division Conference,
JSME, No.04-38, pp. 221-222.
Md. Shawkut Ali Khan, and K. Yamazaki “Modeling Method of Stress
Concentrated Members for First Order Analysis- 2nd Report:
Approximation of 3D- members”, Proc. JSME Annual Meeting 2003, No.03-1, Vol.VI,
pp.17-18.
KousukeOda, Koetsu YAMAZAKI, and Md. Shawkut Ali khan, “Element Development of Simplified
Deformation Analysis for 3D- First
Order Analysis”, Proc. of 3rd CJK-OSM, Kanazawa, Oct
30- Nov.2, 2004, pp. 829-834.
Md. Shawkut Ali khan and Koetsu YAMAZAKI “Modeling Method of StressConcentrated
Members for First Order Analysis”, Proc.
of 3rd CJK-OSM, Kanazawa, Oct 30- Nov.2, 2004, pp. 835-840.
| SL | Collaboration & Membership Name | Type | Membership Year | Membership Expire Year |
|---|---|---|---|---|
| 1 | Institute of Engineers, Bangladesh | Member (M/15509) |